3Rivers Archery




The Trad Gang Digital Market














Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters




RIGHT HAND BOWS CLASSIFIEDS

LEFT HAND BOWS CLASSIFIEDS

TRAD GANG CLASSIFIEDS ACCESS


Main Menu

Alternative to Gasket Lacquer?

Started by JAG, March 24, 2013, 10:02:00 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

JAG

Looking for something to seal shafts, other than gasket Lacquer.  Have used the old standbys, spar varnish, poly, etc.  Looking for something that won't cause cresting to run.  I know...let it dry good first!
Just wondering what is being used.
I don't worry about my arrows.  But I'm making a few custom arrows and want to see whats out there.  Have been out of the arrow making (for others) for years.
Thanks, Johmmy/JAG
IBEP - Chairman Alabama
"May The Good Lord Keep Your Bow Arm Strong and Your Heart and Arrows True!"
TGMM Family of the Bow
PBS Regular Member
Compton Member

RunninWild77

I use fast drying poly in either the can or spray can, holds up good and is inexpensive. And if your impatient like me you can apply two coats of poly in the morning and by evening you can start fletching.
Great Northern Firball 65@28
63' Hoyt Pro Hunter 49@28
74' Bear Kodiak Magnum 45@28 (my wife claims its hers now lol)
71' Bear Grizzly 40@28
70s ? Shakespeare Necedah 50@28

"Fast is nice, but accuracy is everything"-Wyatt Earp

LBR


Jake Fr

True oil makes a nice arrow finish

Whiteh20

I use polycrylic out of a dip tube.  It is over rustoleum crown dip and testors enamel cresting.  These are on carbon arrows and I fletch with duco cement.

Pat B

I used water based poly on most of the arrows I made that I crested and crowned without issues.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Craig

QuoteOriginally posted by JAG:
Looking for something to seal shafts, other than gasket Lacquer.  Have used the old standbys, spar varnish, poly, etc.  Looking for something that won't cause cresting to run.  I know...let it dry good first!
Just wondering what is being used.
I don't worry about my arrows.  But I'm making a few custom arrows and want to see whats out there.  Have been out of the arrow making (for others) for years.
Thanks, Johmmy/JAG
Zip Guard, I have been using it for about 25 years and my cresting does not run. I can dip in about 5 min after cresting. I use testor model paints.

 http://www.lastnlast.com/ZipGuardWaterborneWoodFinish.php  

 http://img.photobucket.com/albums/v462/Cbireley/photos275.jpg

Please no pics wider than 640
Schafer Silvertip

Craig

With the zip guard you can clear over any paint for your crown, I make snake skin arrows and can dip over the snake skins with it. You only need 2 dips one after staining and one after cresting, Get it in a gloss finish since it is a harder finish and if you want it to look satin just steel wool it. I use Fletch Tite Plantinum if I just use a stain crown. If I use paint for the crown I use duco.
Schafer Silvertip

Grey Taylor

Craig, how does that finish hold up to target burn in 3d targets?
Also, why the different fletching glues depending upon stain or paint?

Guy
Tie two birds together; though they have four wings, they can not fly.
The Blind Master

Knawbone

I use water base poly also...... great stuff. I use it on wood shafts. Drys fast, tough, and holds with fletching tape.
HHA 5 lam Cheetah 65" 48@26
HHA W Special 66" 52@26
HHA W Special 68" 56@28
GN Bushbow 64" 56@29
21st Street Chinook 64" 58@28
Kota Prarie Nomad 60" 47@24
You can do a lot of things when you have too W S Butler My Grandfather

dragonheart

Using the Raptor archery finish.  3 dips.  You can dip final coat over the cresting with no issues.  I use testors for cresting.  Also you can use laquer or acrylic.
Longbows & Short Shots

Ground Hunter

Someone mentioned this in the thread.  If you give your arrows a little squirt of Armorall on the shaft, they will pull easy and no target burn on gasket dipped shafts.

Grey Taylor

Actually, that's one reason I use gasket lacquer now is that it has virtually no burn on 3D targets. But I'm always on the lookout for alternatives to everything.

Guy
Tie two birds together; though they have four wings, they can not fly.
The Blind Master

JEFF B

water proof wood stain Bro ya can get it in clear or any color i get it from a place here called kmart   :thumbsup:
'' sometimes i wake up Grumpy;
other times i let her sleep"

TGMM FAMILY OF THE BOW

JAG

Thanks for all the input.  Like I said its been years since I did "custom arrows" for other folks.  I do strictly wood or cane.
Jeff, I didn't know they had real stores down there!  Do they stock chiggers?
Johnny/JAG
IBEP - Chairman Alabama
"May The Good Lord Keep Your Bow Arm Strong and Your Heart and Arrows True!"
TGMM Family of the Bow
PBS Regular Member
Compton Member

Craig

QuoteOriginally posted by Grey Taylor:
Craig, how does that finish hold up to target burn in 3d targets?
Also, why the different fletching glues depending upon stain or paint?

Guy
fletch tite will bond into it and if I use krylon spray paint you need to use duco. Some target burn but not bad at all.
This arrow has been around for about 7 years and looks and shoots great.

 
Schafer Silvertip

graybarkhunter

If I were to crest some carbons with spray paint then seal with some type of poly ( a few coats), would I be able to use super glue to glue down the feathers? Or would it "eat " thru the poly and paint? If so, what's the alternative . Thanks , GBH


Contact Us | Trad Gang.com © | User Agreement
Copyright 2003 thru 2025 ~ Trad Gang.com ©