4" or 5 " feathers on AD trads?

[TSHOOTER]

I just got some Arrow Dynamics shafts and was wondering how many folks use 4" feathers on these?  The nock end is so small I don't know if I can get the helical I want with 5 or 5.5"  If they recover from paradox as well as advertised would I even need 5" feathers?

Thanks

[BDann]

I've got some with 5" parabolic and 4" LW shields.  I can't tell the difference.

[Danny Rowan]

4x4 inch on most of mine

[JohnnyWayne]

I've use both just fine  

[Terry Green]

No problem with 5s.....almost everyone of these are 5s and almost  of the 50 some odd are ADs....and all are bloody....

   

[TRAP]

Here's some 5 1/2" feathers on AD Trads.  Put whatever you want on them.



Trap

[JamesKerr]

I use 5" on my arrow dynamics trad shafts you do have to make sure your clamp and jig is adjusted just right though to get a perfect fit but it's not any harder than using standard shafting.

[threeunder]

3x5" Shields for me...no problems.

[bornagainbowhunter]

I have a ton of helical on mine with 5" feathers. Its not a problem, just do like mentioned earlier and be sure to adjust you clamps.

[TSHOOTER]

thanks guys... I think I'll try the 5"

[LITTLEBIGMAN]

I throw a monkey wrench in here, use as small a feather as you can. Quieter, dries faster , flies better wet and doesn't reduce your EFOC %