Aluminum Arrow Question

[TRT]

I have been thinking about something since I read the recent thread on having arrows swagged.  

Can you mount a broadhead on the swagged end of an Easton Legacy shaft and get the uni-bushing system for the insert end of the arrow?  Is the nock swag angle wrong to do this?  I wish I had some to play with, but as I do not I thought I would ask.

Thanks,

Todd

[Night Wing]

I don't think that will work.

[TRT]

Thanks Night Wing.  I am not sure it would work either.  I was just wondering if someone else had tried to do this before.

[Blaino]

it might work?? i think i'm going to try the glue on adapators....

[3R Shooter]

The nock angle is 11 degrees (standard nock), and your broadhead will need a 5 degree angle (standard) to mount properly.

[shadman]

Won't work. The nock taper is all wrong for the broad head.

[Swamp Yankee]

Nope, two very different tapers.  I've found the best solution is to use a glue in/glue on adapter for glue on broadheads.  It weights about the same as a screw in adapter and is much stronger in my opinion.

[TRT]

Thanks Gentlemen!  That is what I wanted to know!