Arrow spine for ACS CX 45#

[jojo]

I got a ACS CX it is 45# @28" and I need to get some new arrows set up for it.  I draw 28". With 50 gr insert and 160 broadhead what spine Beman classic and what long do you guys think. Everyone is shooting with a similar a weight? Any help is appreciated.

[Pat B.]

A 500 should work well.

[eagle24]

With a 50gr insert and 160gr broadhead, I think you will be slightly underspined with a 500 with the standard sideplate on your ACS-CX.  On the other hand, 400's are stiff for 45#'s.  I think the 500's will work best, but I don't know that I would do the 50gr insert if you are going to use a 160gr broadhead.  I shoot axis 500's in my 40# ACS-CX and draw about 28-3/4".  My shafts are 30-1/2" BOP (I think) and were slighly weak.  I build out the sideplate slightly to tune them.

[The Night Stalker]

I have a 45# at 28 coming, I should pull it about 47lbs so I will be looking at the 400 beman classics to start with. I need a 30inch arrow for clearance and have not decided on what weight point to shoot. I might have to build out a little also. I think arrows might be different for each individual according to their release,etc.

[Cecil]

Carbon Express 150 should do good without the 50grn insert.

[katman]

400's leave full length and cut from back to bare shaft tune. I have an ACS CX 45@30 shooting axis 340 31" 200gr point and 100 grain insert.

[jojo]

Hi guys, thanks for all informations about my nice ACS bow.