Great Northern T/D Quick Mount

[Coccobill]

Can I use this quiver on a Martin Hatfield take down bow? Do I need different bolts?

Thanks

[JRY309]

Which GN are you talking about,they have a Quick mount that attaches with thumb screws to the side of the riser with quiver bushings.And the have a limb bolt quick mount too,you put brackets under the limb bolts and the quiver can be attached and removed easliy.

[Coccobill]

The second one that is called (like in my title) Quick mount. Do I need different bolts?
thanks

[JRY309]

The bracket should fit right under your stock limb bolts,then you can attach and remove the quiver without breaking the bow down.I have used it on other T/D bows with the same limb bolts.Just make sure your bolts on the Martin are long enough.

[LP Kelley]

The Quick Mount is 3/16" thick.

[bshunter]

I had one briefly...and I don't think I had to use different bolts, nice quivers.

[John Kennedy]

I have one for a black widow,it does have slightly longer bolts,and a bushing to make up the difference between the limbbolts and bracket difference in diameter.