skinny carbons/bow quiver?

[tradtusker]

changed over to shooting the skinny Beman MFX shafts but find my bow quiver is not gripping them tight enough and they slip out, are there any replacement grippers made for skinny carbons? if so who sells them?  anyone else had this problem

the quiver i have is a boa bow quiver from 3 rivers

thanks Andy

[tukudu]

Andy,
    Go buy a foot of latex tubing and just cut 1/4 in or slightly larger pieces and you can slip over arrow retainer. tom

[frankwright]

Andy, 3 rivers and most other places sell replacement grippers for the thinner shafts. The metal channel that holds the rubber gripper is the same size on many different quivers so I have found they all pretty much fit.
You can also do as tom said and get either a piece of latex tubing or some of the tiny rubber bands used on teeth braces and slip them over each leg of the gripper.
Good Luck!

[zipper bowss]

Andy you have a pm.
Bill

[A.S.]

Thunderhorn sells rubber spacers to put on your grippers so they hold the skinny arrows. Black Widow carries them as well.

[tradtusker]

thanks guys
Bill ill give you a shout