Carbon Challenged...need help!

[JCJ]

I have a Big River R/D Longbow. 64", 55# @28". I draw the bow 31.5-32" It is a fast flight bow and the sight window is cut to center.

I'd like to shoot the CX Maxima arrow shaft as it is 33" long and provides adequate clearance once I get a broadhead on. I have a Maxima 250 with the standard insert and a 200 gr. tip. It flies excellent but is way to light ...total arrow weight is only 460-470 grains.

Will I be able to add an additional 125-150 grains of point weight to the 250 without running into weak spine issues or, do I need to go to 350's?

Thanks!

[Bigriver]

How about the weight tubes? Otherwise, I think you will need the 350`s at that length if you front load them that much.

That is the main reason I shoot the heritage 250`s, for weight without frontloading or weighting them. I shoot the same bows as you, but my arrows are 31.5" They usually end up around 540 grains.

[Shawn Leonard]

Shoot the Heritage 250 with the 200 up front, it will weigh right around 550 all set up. Shawn

[JCJ]

What is the maximum length finished arrow I can get from a Heritage 250 or Heritage 350?

THanks

[Bowmania]

Just curious what your going to hunt.  That's plenty for whitetail sized animals.  And I've killed an elk with lighter weight and a few less grains.

Bowmania

[metsastaja]

250 shafts are 32.5" long

[wtpops]

Try the 350 with 100 grain brass incert with same weight tip should get you around 600. With your draw and weight this could end up a bit week
you might have to go to a .300 and load the front, IMO (your results may very)

[JCJ]

Here is what worked out of my set up. Full length CX Heritage 250, four-fletch, 100 grain brass insert, 250 grain field tip. Total arrow weight 733 grains , 26% FOC. Perfect arrow flight. Very little arrow drop at 15- 18 yards. Best of all the bow is very quiet and stable.