600 spine?

Gapmaster · March 01, 2009, 01:20:00 PM

Not long ago I saw a post on here about an arrow company comming out with some 600 spine carbon arrows. Did that happen and where can I find them? Thanks

bjordnolf · March 01, 2009, 01:36:00 PM

Easton Redlines come in that spine I just got some for my fita bow. Supposedly carbons in this spine can be quite weak so I wouldnt use them for anything but targets.

SlowBowinMO · March 01, 2009, 01:54:00 PM

We have a new Carbon Express .600 spine in stock in limited quantities. Not even on the site yet.

They are CE Predator II's 20/40's (.600), shafts run $49.99 a dozen.

PM or e-mail if I can assist you in any way.

Tim

shortstroke 91 · March 01, 2009, 02:56:00 PM

Gold Tip 1535 is coming out soon. I'm sure SipsyRiver will be here soon to answer your questions.

Ryan Sanpei · March 01, 2009, 03:01:00 PM

Easton ST epics
Gold Tip Ultra Light
Beman ICS Energy
Carbon Tech has .650

Blacky · March 01, 2009, 03:16:00 PM

Easton ST Epic 600 are good shafts for the money and readily available.

C ya
Blacky

Shawn Leonard · March 01, 2009, 03:48:00 PM

Entrada from Gold tip been out quite a while. I shot them off a few bows 35-45#s with 125 to 175 up front cut to 29"s. Shawn

shortstroke 91 · March 01, 2009, 04:07:00 PM

Shawn, I've been shhoting the 600 Entratdas for a while and have had 3 break on entering deer and 1 on a small hog. Did you ever have any problems with these. I shoot 29" 100 grain brass insert and 125 grain head, 45# recurve @ my draw length. I put 29" of 3/16 poly rope inside to bring them up to 8.2 gpi also. They bare shaft the same as my fletched broadheads and field points. I think I'll try the 1535 when they come out.

Shawn Leonard · March 01, 2009, 05:43:00 PM

I footed mine with 2"s of aluminum and shot the Muzzy shoot with them. This shoot is the hardest I know of on arrows. I believe I broke 3 in two days of shooting, which is pretty good! Shawn

pointystick · March 01, 2009, 08:24:00 PM

The wall thickness on the 600 Entradas is around .017". The 1535 Trads are supposed to be .025", or about the same as the 3555 shafts. I believe the main intent was to increase GPI, but it should improve strength at the same time.

DoubleLung · March 01, 2009, 09:11:00 PM

I picked up some Entradas in 600 spine and they have been shooting great. I only use these on my target limbs 42#'s and so far I'm very impressed with them. I havent chrono'd them yet but they are quick and are still 7.3gpp.

Cherokee Scout · March 01, 2009, 09:31:00 PM

Gold Tip has a black shaft that is .600 and a new woodgrain finish (1535 Traditional).
The 1535 may be available later this week or next week. The 1535 will weigh about 8.3 gr/inch.