$10.07...3 hours...- 6 outside

[Jerry Wald]

great work

[BowHuntingFool]

I tell ya I like it a lot! My next project is a bow rack! Well done!

[blind one]

I was wondering how long it would take for someone to notice my mess up on the arrows.    The arrows that arent fletched will stay like that.The ones with the tips have to be put in from the front side of the rack( remove the bows). The holes are drilled in the center of the top board.I added the side racks for my Broad head arrows.(see pic below). I drilled a hole in the center,then used my jig saw to make grooves for the blades to fit thru. I used the left over boards for the bh racks.Good thing I have a ton of arrows...    

[BMN]

Nice job. I think I would have made it with an extra place for your next bow.  

[Night Wing]

What's the length and width of the rack?

[Over&Under]

Excellent!!

What kind of bow is the top one?

[blind one]

The length is 4'. I cut 2 of the 8'ers in half for the front and sides. The width is 20" inside to inside. You will need 5 of these. The pegs are 6" apart down the front. This centered them all the way so you have equal distance from the top to bottom. I drilled about 3/4 of the way thru the face boards and used gorilla wood glue for the pegs. The pegs are 4" long

The bow on top is a Darton Executive.

[Marty Wiseman]

7 bows!  That's a nice bow rack, but if you buy anymore you may have to to just build an add on room to your house and make all the walls with hangers on them  

[doug g]

Very Nice.