3D Target Repair?

[Fresno Field Archer]

Hello everyone. I had seen a post on iether Pow Wow or the How to Section on fixing arrow damage on 3D animals. I was wondering if anyone could point me in the right direction to find it. Thanks in advance.

[Mallardstacker]

I did a search in PowWow and found these two:

http://tradgang.com/noncgi/ultimatebb.php?ubb=get_topic;f=1;t=048582#000000

http://tradgang.com/noncgi/ultimatebb.php?ubb=get_topic;f=1;t=041976#000002

Also searched the how-to's and didn't come up with anything.

3Rivers also carries a 3D repair kit for bout $40 - alot cheaper than a new target.

On another note, One area that I hunt is pretty close to your range on Dunlap Rd.  Does the FFA have a website?  I need to get by there and check it out.  

Stacker

[JBiorn]

spray insulation and spray paint.

[Benoli]

Here is the FFA website:
http://fresnofieldarchers.homestead.com/

You can also find others in California by following clicking the "Maps to Ranges and Archery Shops" button no the CBH site:
http://www.cbhsaa.net/Road%20to%20Ranges/roads%20to%20ranges.htm

[Eric Krewson]

Here is one of my how-tos.

http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=048562

[Dave Coalter]

Run down to Home depot and pick up a can of great stuff. It works great for fixing 3-d targets. We have a course with about 30 - 3d targets and that is all we use. Not expensive and it does work.

[schnitz]

you can fill the hole with fiberfill and wrap the target with burlap. secure the burlap with small nails on top and bottom of target. ive done the repairs on many targets and have no problems stopping arraws from my 70# hill bow,they pull out alot easier too.

[deertraks]

This what schnitz is talking about.  http://www.parsonsoutdoors.com/3D_FIX_TIP.wmv  
I use decking screws instead of nails.

[Dave Worden]

You can buy a foam kit from 3-D Country that works very well.

www.3_DCountry.com