DAS Kinetic?

[tracker12]

Boy I want one of these after reading this post.

[Terry Green]

Kirk...there is no 'story' and nothing 'happened' beyond what I stated....this is not a soap opera site.  Read what I said earlier, that's the story and it needs no further discussion....so there will be none.

Thanks.

   

[Captain*Kirk]

Originally posted by Terry Green:
Kirk...there is no 'story' and nothing 'happened' beyond what I stated....this is not a soap opera site.  Read what I said earlier, that's the story and it needs no further discussion....so there will be none.

Well, alrighty then.

[Gil Verwey]

Other than Gen 1 and Gen 2 series weren't there several different models? I thought there was a Master Hunter and Hunter.

Does anybody have information on the different models that were available and their differences to help me out if I see a used one come up?

Thanks again
Gil

[Gil Verwey]

Does anybody have any thoughts about the new Tribute 19" riser from 3Rivers? They are accepting deposits now.

The NEW DAS™ Tribute 19" Riser is the next generation of DAS™ risers designed with center shot and ultimate tunability in mind.
•Riser is machined from a solid billet of 6061 aluminum
•303 stainless limb pads, adjustable limb bolt and nut, and inserts
•ILF and DAS limb connection option available with lateral limb adjustment capability
•Type III hard coat anodized black
•Removable shelf for full centershot capabilities
•Each riser will be serial numbered*

[katman]

If I remember correctly Gen1=kinetic hunter, Gen2=master hunter. Most are black but a few were brown in the gen1. These are 17"risers. The Das Elite is a 21" designed by David primarily red but a few of different colors were made. Lots of pics on the net of these risers.

[Gil Verwey]

Thanks Gary. I am searching and finding a lot of info now. Are you interested in selling your Gen 1? It was worth a shot!

Have you seen the new tribute 19" riser at 3rivers?

Thanks
Gil

[cch]

I think the master Hunter just had better limbs and it was fully set up and tuned by David.

There was the gen 1, gen 2, elite, Dalaa that was anodized usually bronze made by David and then a 21" Naki,then 3 rivers Dalaa and soon to be a tribute.

I have number 13 in the Gen 1 and mine was considered the Hunter as I got the cheap kap carbon limbs instead of winex.

[Gil Verwey]

Thanks Chris. Keep me in mind if you ever decide to sell the Gen 1.

[Bob Stager]

Gil. I sent you a pm about a Gen1 Das. Thanks. Bob

[Gil Verwey]

I am in Bob. Check out your email and PMs.

Thank you very much.

Gil