Building a Custom Flemish String (VIDEO) ***updated with all four videos

[Caughtandhobble]

Thanks Ryan, some more great videos. What material did you pad with?

[Ryan Sanpei]

Thank you Ben. I use the same material to pad. So if I decide to build with 8125, I'll use the same 8125 in the pads.

[Bowitis]

As always, great job Ryan. Your timing is good also, I need to re-serve a couple of my favorite strings.  Thanks!

[Caughtandhobble]

Originally posted by Ryan K Sanpei:
Thank you Ben. I use the same material to pad. So if I decide to build with 8125, I'll use the same 8125 in the pads.

Thank you sir. I almost did not watch your new videos because I was scared I may change something in the way I make strings. As you may remember, the last string making video got me going with my string making and I have never looked back.

It is very kind of you to share your time and knowledge with us. WE all appreciate, and THANKS again!!!

[Ryan Sanpei]

Your welcome Kevin. Hope all goes well with the serving.

Ben, as you probably noticed, it's basically the same thing. I just wanted to try to do a better job the second time around. I appreciate the kind words!

Ryan

[Hiro]

Good job brah!

[Ryan Sanpei]

Mahalo Hiro!    

[DennyK]

Ryan, thanks for the videos, I always enjoy reading & watching the things you post, thanks again for your efforts!


Denny

[Gray Buffalo]

Very good  

[Ryan Sanpei]

Thank you for the kind words Denny and Jerry!

Aloha!

[frank bullitt]

Ryan, you should post this over in the Bowyer forum!

[Ryan Sanpei]

Frank, feel free to share the link where you see fit.
Here's the youtube playlist with all the videos.  https://www.youtube.com/playlist?list=PLlahRkPOxoysN1Bzb0dQtT_u4gSVam6cX

Aloha!
Ryan

[frank bullitt]

Ryan, I would, but don't have the capacity or computer to do!

[MCNSC]

Ryan, thanks for taking the time to post these videos. I had made a string board and had some string for close to 2 years. But, after buying DVDs and watching videos I decided not to bother as it looked to complicated.  
Well, after seeing your videos I got my stuff together and gave it a try, first one looked good but came out too short. I made some adjustments and the second one was right. Now I have to serve it and the on mocks.
Thanks again.

[Ryan Sanpei]

Thank you for your comment Mike! I'm glad that it helped you to build your own strings. This is my updated video and I was hoping that I did a better job at explaining this time around. These videos are not easy to put together and definitely frustrating at times, but hearing back from guys like yourself makes it all worth it in the end!

Aloha!      
Ryan