Any tips on trying to straighten this premo osage stave..LOL!The handle area is what im really concerned with.Im thinking lots of heat and park my truck on it!LOL!Im going to try to put grease, heat and clamps to it in the morning.We'll see what happens.    

Ya prolly want to reduce it closer to bow shape before trying. The thinner the wood the easier to straighten. Those are awesome thick rings.

Roy i thined it more after this pic was taken.(its actually down to two rings now)Its starting to bend a little at floor tiller.Its a little under 1/2" thick and 1.5" wide at this point.I may need to thin it a little more before trying to straighten it.The handle area is quite snakey im not sure how or if this will work out.We'll see.Scott

I did a step by step build along last year or the year before for the trade bow I built that was as crooked a bow stave you have there. Do a search.

Don't be skeered, Scott:) Patience and go slow.

For stuff that is really kinked in the handle that I know will crack when I straighten it I cut the stave into billets, realign and glue it back together straight.

X2 on cutting and glueing back together.

you will give up about 4" to the splice, so if you have enough length to do it, you can make some very nice adjustments to a stave by doing what Eric suggests. straighten up the side to side crookedness as well as introduce some backset. works equally well with board stock. lots of osage boards been whacked in two and spliced back together in my shop to make a nice bow out of what was otherwise a large osage boomerang.  

Thanks for the tips guys.Eric that crossed my mind.Seems like that would be a good fix for crooked wood.But ive already got it greased,heated and clamped in the cull.Dont know if it will hold shape or not.This is my second osage bow build.the first one was for the very first bow swap.It was quite crooked but not as bad as this on in the handle area.Ill keep you posted weather it works out or not.Thanks again,Scott

Well it looks pretty good as far as staraighting goes.string tracks center of the handle.I had to clamp and heat it twice.While attempting to remove a twist aprox. ten inches before the tip I had one spot for some reason make a deep dent in the belly i thought it was just my thin block of wood smashing under the clamp that i had place there to keep from marking the wood.Well it wasent it was the osage.And it took very little pressure to do it.Before any one asks i did not have my foot on the clamp LOl!It made a rather deep dent in the belly.(i know moist heat will raise it but i was afraid it might weaken it more than the dent already has)Im ready for the short string and i havent eliminated it yet so its pretty deep.Well see what happens.If it holds up ill post some pics.Scott

So far so good.This is my Dad drawing it for the pic.Dad and i shot around 250 arrows through the mamba over the last couple of days.Im happy with it.And the main thing is Dads happy with it!I put the first coat of tru oil on this evening.It may not be perfect but if you look at the before pic,it was allmost fire wood in my book.LOl!Thanks for looking, Scott..By the way the tiller looks much better in the tillering tree.I dont know if its the angle of the pic or Dad slightly canting the bow.And the tips came out naturally "flipped"(reflexed).So i cant take credit for that.Ill post a pic of it just strung after the finish is on.    

Looks great! Well done

Nice.  Congrats!  

Good job.   Cool bow

Tiller looks fine but I think I would get the mid to outer limb on the upper bending a bit more.

recently , when i tiller, from about 75% done onwards, i use photographs to check the tiller balance, as many times when i get it perfect on the tree, it doesnt match me!!no matter how much i try and simulate my grip and draw with the tree.

it really looks great- well done!!

Fujimo I know exactly what your saying.Ive heard of people shaping there grip before doing the final tiller.Thay way they can place the pressure point more twords the actual spot it would likely be in your hand.Im with you.My hand is shaped nothing like the top of my tillering tree.LOl!

Here is the finished product.Again thanks for looking,Scott

Beautiful bow, Scott!  

Done yourself proud with that un. Very nice.

Love the profile with the flipped tips.  Looks great    

That is a great looking bow! You did a fine job on a crooked stick. The r/d profile is beautiful.