I have been shooting my 70" Wesley braced at 6.25" but decided to drop it to 5.75" to do a little fine tuning with my broadheads..... DD (my bow's name) seemed to shoot better and brought my broadheads back to center.

Anybody else shoot their Hills braced that low?

Ryan that Shelton should get the job done and with style. Great choice of glass colors.

Bought a very nice classic from Steve at Alabama shoot all ash limbs  54@28 and68". a super nice bow. sorry can't do pics.

QuoteOriginally posted by Blaino:
I have been shooting my 70" Wesley braced at 6.25" but decided to drop it to 5.75"
Anybody else shoot their Hills braced that low?

I shoot my Sunset Hill at 5.75" too. Nate recommended a low BH.

Do you guys find more wrist slap with lower brace? And I have had the brace set so low I've actually hit my thumb where it joins the wrist.

Comments??

I haven't noticed any extra slap but I was really just wanting to weaken my shafts a little bit since they had been hitting left by a few inches. Then I noticed the bow felt more "calm" not that it wasn't before. More like better to best.

I'm running my Miller's and Schulz at 5.5 - works perfectly and gives a little extra power stroke to my stubby draw....

My Tembo is 66'is 6.25 fistmal.

I shoot my bows with brace heights in the 5's also. 66" bows are between 5-1/2"-5-7/8"
I shoot my 64" bow at 5-3/8"
Arm guards aren't just for the "Hill" look.  

I must be the odd ball. I shoot mine 6 3/4" or so, lower doesn't feel right

Thanks Brian....I was starting to feel outta place at 6 3/4".

A buddy wanted me to make his wife a bow.  Made a texas ebony and juniper Hill style with a stingray wrap.  It is 62" and 24@25.

   

   


   

Great looking bow typical2, did you make that or your buddy?

Sorry i had some typos there.  I made this for a buddy's wife.

QuoteOriginally posted by Brianlocal3:
I must be the odd ball. I shoot mine 6 3/4" or so, lower doesn't feel right

Agreed, 6 1/4" to 6 1/2"  for me.  Lower gives me bad arrow flight and I've monkeyed with it a lot.

QuoteOriginally posted by Overspined:
 

QuoteOriginally posted by Brianlocal3:
I must be the odd ball. I shoot mine 6 3/4" or so, lower doesn't feel right

Agreed, 6 1/4" to 6 1/2"  for me.  Lower gives me bad arrow flight and I've monkeyed with it a lot. [/b]

Me too I guess, I shoot a 68" and 6 3/8" is where I stay.

I shoot 70" and use 6.5"

typical2, That's a beauty! Very nice work. I wish I could do that.  

Beautiful bow Typical....that Ray grip and Texas Ebony riser are stunning.

AWSOME bow typical!!