I've been looking around at photos to try to identify these broadheads and can't seem to find them. They have no markings at all. Approx. 1 1/4" x 2 1/2". With the adaptors they weigh in the neighborhood of 180gr.

Any help would be appreciated.

Thanks

Not sure but they look like Wolverines to me. A dbl. bevel made by Grizzly.

Yep....Wolverines.

early Wolverines designed/marketed by Harry Elburg, The samy guy who brought us the Grizzly and about the same time.  I used them for a while and thought they were a pretty good head.  The steel was kinda soft so it sharpened easily but some folks had tip curling issues with them.

wolverines come with a rounded/curved edge.
These look like wolverines that have been filed to a straight edge.

I'd dare say that looking at the angle of the back of the blade they started off at 160 grains
  http://grizzly.awardspace.com/

They are early Wolverines. Before the Wolverine had the curved edge it was strait.
Bill

QuoteOriginally posted by zipper bowss:
They are early Wolverines. Before the Wolverine had the curved edge it was strait.
Bill

oh..cool.
Learned something today!...and it's still early!
 

Early Wolverines!

Gentlemen, thank you for your help.