3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






RIGHT HAND BOWS CLASSIFIEDS

LEFT HAND BOWS CLASSIFIEDS

TRAD GANG CLASSIFIEDS ACCESS


Author Topic: Brace height and string length question...  (Read 754 times)

Offline DRR324

  • Trad Bowhunter
  • **
  • Posts: 625
Brace height and string length question...
« on: October 13, 2008, 07:38:00 AM »
I let one of my buddies borrow one of my old Bear recurves, for his high school aged son to use.  I honestly don't recall the model of the bow, possibly a polar.  But, my question- it is marked 52" amo, what length string to purchase, and what should brace height be?
I know I could research it on the net, but also know someone here will know the answer, and I trust the info from fellow gangers.
Thanks
Dave
Pittsley Predator Classic
53# @ 28"
Easton Axis FMJ Camo-400's w/150g RazorCaps

"Dad, know what I like most about deer hunting?  The adrenaline rush you get when you know your going to get a shot at one"- my son Tyler after his first miss..

Offline Tim Fishell

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 3772
Re: Brace height and string length question...
« Reply #1 on: October 13, 2008, 08:33:00 AM »
Dave, if it is a Bear 52" recurve then it should be a Kodiak Magnum.  The string length should be around 48" and brace height should be around 8 inches.  I am just going by what I remember but I can confirm that when I get home and can check mine.
Dreams can not be bought; they are free to those who have lived. -Mike Mitten

We must go beyond the textbooks, go out into the untrodden depths of the wilderness & travel & explore & tell the world the glories of our journey

TGMM Family of the Bow

Offline vermonster13

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 14572
Re: Brace height and string length question...
« Reply #2 on: October 13, 2008, 08:54:00 AM »
Tim's advice is right on.
TGMM Family of the Bow
For hunting to have a future, we must invest ourselves in future hunters.

Offline DRR324

  • Trad Bowhunter
  • **
  • Posts: 625
Re: Brace height and string length question...
« Reply #3 on: October 13, 2008, 09:00:00 AM »
Tim,
Not sure that it is a Kodiak... pretty bad when I can't remember.  But, it's one that I don't shoot much.  I really think it says Polar II or something to that effect....I do recall it being 55#, 52" amo.  I think the string I have for it is too short- brace height is pushing 10" or so.
Pittsley Predator Classic
53# @ 28"
Easton Axis FMJ Camo-400's w/150g RazorCaps

"Dad, know what I like most about deer hunting?  The adrenaline rush you get when you know your going to get a shot at one"- my son Tyler after his first miss..

Offline vermonster13

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 14572
Re: Brace height and string length question...
« Reply #4 on: October 13, 2008, 09:01:00 AM »
If it's a PolarII, it is more likely to be a 62" bow.
TGMM Family of the Bow
For hunting to have a future, we must invest ourselves in future hunters.

Offline DRR324

  • Trad Bowhunter
  • **
  • Posts: 625
Re: Brace height and string length question...
« Reply #5 on: October 13, 2008, 09:06:00 AM »
Vermonster- feeling like a newb over here....
it definately is more in the 52" range, way shorter than my 62" bob lee.
I'll do some net search and see if I can track down what bow it is...
Pittsley Predator Classic
53# @ 28"
Easton Axis FMJ Camo-400's w/150g RazorCaps

"Dad, know what I like most about deer hunting?  The adrenaline rush you get when you know your going to get a shot at one"- my son Tyler after his first miss..

Offline Tim Fishell

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 3772
Re: Brace height and string length question...
« Reply #6 on: October 13, 2008, 09:06:00 AM »
Dave, from what I know (which isnt much about old bear bows) the only bow they made that was 52" was the Kodiak Mag.  The Polars from that I remember were all 58" and longer.  Regardless of what kind of bow it is if it is a 52" AMO bow then I would still start in the area I had said above.  Hope this helps out.
Dreams can not be bought; they are free to those who have lived. -Mike Mitten

We must go beyond the textbooks, go out into the untrodden depths of the wilderness & travel & explore & tell the world the glories of our journey

TGMM Family of the Bow

Offline DRR324

  • Trad Bowhunter
  • **
  • Posts: 625
Re: Brace height and string length question...
« Reply #7 on: October 13, 2008, 09:13:00 AM »
Ok, a bit of net surfing->>>>>
its a Black Panther, which from what I just read, is a Kodiak with different finish, sold mostly through Montgomery Ward stores.  SO- Tim, you were correct in your vast knowledge of Bear bows....  :thumbsup:  
I'll call my buddy and have him check string length just to be sure.  Thanks guys!
Pittsley Predator Classic
53# @ 28"
Easton Axis FMJ Camo-400's w/150g RazorCaps

"Dad, know what I like most about deer hunting?  The adrenaline rush you get when you know your going to get a shot at one"- my son Tyler after his first miss..

Offline Tim Fishell

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 3772
Re: Brace height and string length question...
« Reply #8 on: October 13, 2008, 09:20:00 AM »
I wouldnt go that far Dave!!  Glad to figured it out and set me straight.  I never heard of a Black Panther.  See you taught me something new today!!  You the man!!   :thumbsup:
Dreams can not be bought; they are free to those who have lived. -Mike Mitten

We must go beyond the textbooks, go out into the untrodden depths of the wilderness & travel & explore & tell the world the glories of our journey

TGMM Family of the Bow

Offline DRR324

  • Trad Bowhunter
  • **
  • Posts: 625
Re: Brace height and string length question...
« Reply #9 on: October 13, 2008, 09:38:00 AM »
Glad I could further your Bear Recurve education!
Now, don't spend the rest of the day doing internet research on them....
You guys need to keep me informed of when your getting together for a hunt, bunny hunt etc.  I haven't talked with Jason all summer.  But, between coaching summer travel softball, sons football, and my new position of girls varsity bball asst., I don't have much free time.  BUT- pm me with details, dates, etc, and I may just show up, it'd be great to meet everyone face to face.
Dave
Pittsley Predator Classic
53# @ 28"
Easton Axis FMJ Camo-400's w/150g RazorCaps

"Dad, know what I like most about deer hunting?  The adrenaline rush you get when you know your going to get a shot at one"- my son Tyler after his first miss..

Offline Tim Fishell

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 3772
Re: Brace height and string length question...
« Reply #10 on: October 13, 2008, 10:07:00 AM »
I will be sure to let you know when we get together up there.  Jason and I were talking about possibly doing a hunt up on his stomping grounds in the Stanton or Flat River state game areas.  If it happens I will be sure to let you know.  Take care buddy and good luck!!
Dreams can not be bought; they are free to those who have lived. -Mike Mitten

We must go beyond the textbooks, go out into the untrodden depths of the wilderness & travel & explore & tell the world the glories of our journey

TGMM Family of the Bow

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©