Main Menu

lowering poundage

Started by ocd, March 16, 2026, 05:31:22 PM

Previous topic - Next topic

Pine, Smguinnip, jess stuart, Switchensticks, B-JS, OldRawhide42, Jeff tech, Crooked Stic and 8 Guests are viewing this topic.

ocd

made a glass bow for my niece and it came in a little heavy. need to remove around five pounds. Can I sand just the belly glass to help reduce weight? I already have the back skinned with artificial snake skin so I don't want to sand the back. The glass is .040 thk. how thin could I safely reduce this. How about trapping would that be a better option? Should I trap the Belly or The Back? Thanks.

Jeff tech

#1
What kinda bow is it? Rounnd off the corners first. Then think about trapping

Pat B

You could possibly reduce the width to reduce some weight.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Kirkll

Quote from: ocd on March 16, 2026, 05:31:22 PMmade a glass bow for my niece and it came in a little heavy. need to remove around five pounds. Can I sand just the belly glass to help reduce weight? I already have the back skinned with artificial snake skin so I don't want to sand the back. The glass is .040 thk. how thin could I safely reduce this. How about trapping would that be a better option? Should I trap the Belly or The Back? Thanks.

No worries at all dropping 5#.... sand the belly side of the limbs equally top and bottom limb, and keep an eye on the tiller measurements. trapping the belly side is ok too, just watch your tiller balance as you go.
Big Foot Bows
Traditional Archery
bigfootbows@gmail.com
http://bigfootbows.com/b/bows/

ocd

thanks for responses guy's. Hey Kirkll how thin can I safely go on sanding the belly glass. Thanks

Crooked Stic

So it's probably already a narrow light weight bow. Keep in mind the weight is already small so more work to get the weight off.if you got. 040 glass to start that should be no problem. For a kids bow .030 glass may have been better. Better a thicker front than belly. So sand the belly as Kirk said keeping an eye on things as you go.
High on Archery.

mmattockx

Quote from: ocd on March 16, 2026, 05:31:22 PMmade a glass bow for my niece and it came in a little heavy. need to remove around five pounds. Can I sand just the belly glass to help reduce weight? I already have the back skinned with artificial snake skin so I don't want to sand the back. The glass is .040 thk. how thin could I safely reduce this. How about trapping would that be a better option? Should I trap the Belly or The Back? Thanks.

Without more description it's hard to say what the best course of action is. How heavy is it now? How wide?


Mark


Contact Us | Trad Gang.com © | User Agreement
Copyright 2003 thru 2025 ~ Trad Gang.com ©