Writing on my bow.

Crooked Stic · February 13, 2026, 07:13:51 PM

I have tried all sorts of pens the kind you dip roller balls Signos etc. They all seem to work for awhile. But I need a no fail works everything pen. What do you guys use??

Kirkll · February 14, 2026, 12:42:40 AM

https://www.amazon.com/Uchida-America-1234-3C-DecoColor-Silver/dp/B00A6VVO1M/ref=sr_1_6_pp?adgrpid=184736496845&dib=eyJ2IjoiMSJ9.EfhHvQfdtPx3Ij3dZLApzxJqloVOre_T8VQsfIl-ponPB1c9en3K2qwXbreGjtdTtllEnsIJDJCbWe9OwxYor1y7kOdBaAIa4rMd2tnzSwTNkdrfwVn7WoJ6nrOvK1jDP-CBpp5ygjL0pZ2HDAcCYXlqCSOKvTiJ0mzELOxRyOSplXRNNMYl6zYqH-GgmCU-GATXfVTQsJSWThWTsADO9dvYkc7JMkIbd-nQmzl_I2MhDLHKbRzt_1_UagD7AE6k_rK7gJKQGe1amThHSwcUAF2o7YnTgd8G5usbU_mMnvE.vWZ7Oh1jim66BCHgbBNbHSEggtqx7zk77bJOHPpjwxU&dib_tag=se&hvadid=779670265919&hvdev=t&hvexpln=0&hvlocphy=9052493&hvnetw=g&hvocijid=10213526942270010626--&hvqmt=e&hvrand=10213526942270010626&hvtargid=kwd-2454455216136&hydadcr=6781_13535684_2076009&keywords=deco+color+extra+fine+tip+paint+pen&mcid=1f940817cf703abaa566494853081fd0&qid=1771047724&sr=8-6

Guster · February 14, 2026, 04:32:52 AM

A bit unorthodox but after so many issues with pen tips drying using Bombay India ink I started using bamboo skewers to write on my bows and it works remarkably well. Only a slight adjustment period for writing with a skewer.

Crooked Stic · February 14, 2026, 06:42:56 AM

Kirk I got one of those years ago that worked really well. Trying to find it local. But good ole Amazon shows up again.
Thanks

Kirkll · February 14, 2026, 01:10:59 PM

Quote from: Crooked Stic on February 14, 2026, 06:42:56 AMKirk I got one of those years ago that worked really well. Trying to find it local. But good ole Amazon shows up again.
Thanks

I played with calligraphy pens and different types of ink, and all sorts of felt type markers and never could get any consistency. These extra fine paint pens have worked best for me... The only down side is the tips do get clogged from time to time, and cleaning them is a waste of time. That, and they are a bit expensive. i typically use the black and the gold colors most, but silver works well too. I wish they had an extra/extra fine tip model. some of these pens are just have a bit to thick of lines for writing small.

Jeff tech · February 19, 2026, 05:03:24 PM

Email Roger down at BlackWidow and ask him what he uses that's what I've been using. I know Kirk will tried it he didn't like it but that's what the black widow uses and I was very impressed and that's what I use.

Kirkll · February 22, 2026, 11:27:47 AM

Quote from: Jeff tech on February 19, 2026, 05:03:24 PMEmail Roger done at BlackWidow and ask him what he uses that's what I've been using. I know Kirk will tried it he didn't like it but that's what the black buddy uses and I was very impressed and that's what I use.

Actually I would prefer the artistic look of the calligraphy pen, but it's very difficult getting consistency on fiberglass. Same thing with a fine tipped roller ball pen... they don't work on glass very well at all.

Gusd · February 26, 2026, 02:52:38 PM

I have always used a speedball quill pen (VERY SMALL) made of steel.
I also use a MICRON 005 Size

mmattockx · February 26, 2026, 07:00:37 PM

Quote from: Kirkll on February 22, 2026, 11:27:47 AMActually I would prefer the artistic look of the calligraphy pen, but it's very difficult getting consistency on fiberglass. Same thing with a fine tipped roller ball pen... they don't work on glass very well at all.

A couple thoughts:

1) Have you tried scuffing the glass with fine sandpaper before writing on it?
2) Have you tried one of the brush pens that give a similar result to calligraphy pens, but wet the surface of pretty much anything?

Mark

Kirkll · February 26, 2026, 11:47:45 PM

Quote from: mmattockx on February 26, 2026, 07:00:37 PM
Quote from: Kirkll on February 22, 2026, 11:27:47 AMActually I would prefer the artistic look of the calligraphy pen, but it's very difficult getting consistency on fiberglass. Same thing with a fine tipped roller ball pen... they don't work on glass very well at all.

A couple thoughts:

1) Have you tried scuffing the glass with fine sandpaper before writing on it?
2) Have you tried one of the brush pens that give a similar result to calligraphy pens, but wet the surface of pretty much anything?

Mark

What type of brush pen are you referring to? Ya got my curiosity going with that one.

I always preferred the looks of calligraphy better than a paint pen, but I really suck at it for consistency. I pulled my hair out trying to get good at it too. But the fiberglass surface, even lightly sanded with 220 was just to slick to keep the ink flowing. I'd love to up my game on the bow writing.