« previous next »
Pages: [1]   Go Down

Author Topic: Tiller check  (Read 208 times)

Online Brian from GA

  • Trad Bowhunter
  • **
  • Posts: 140
  • Brian
Tiller check
« on: May 14, 2025, 10:38:30 AM »
Hey guys, I'm looking at the tiller on a bow, and it seems to have very little bend towards the limb tips. FT is .002/in total taper with two tapered and one parallel. This look good to you? 

Logged

Online Kirkll

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 2822
Re: Tiller check
« Reply #1 on: May 14, 2025, 11:31:07 AM »
You can easily go up to .003- .004 FT on a long bow design to help get those limbs bending a bit further out, and use tip wedges to stiffen the tips up. 

How long is your riser and bow length in this photo?  Have got a close up on the fade section?
Logged
Big Foot Bows
Traditional Archery
[email protected]
http://bigfootbows.com/b/bows/

Online Brian from GA

  • Trad Bowhunter
  • **
  • Posts: 140
  • Brian
Re: Tiller check
« Reply #2 on: May 14, 2025, 01:00:12 PM »
18" riser


Logged

Online Kirkll

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 2822
Re: Tiller check
« Reply #3 on: May 14, 2025, 10:49:52 PM »
Good looking fades… I’d increase your taper rate first and see what that does for you before discussing the  benefits of power lams.   Kirk
Logged
Big Foot Bows
Traditional Archery
[email protected]
http://bigfootbows.com/b/bows/

Online Brian from GA

  • Trad Bowhunter
  • **
  • Posts: 140
  • Brian
Re: Tiller check
« Reply #4 on: May 14, 2025, 11:07:17 PM »
I'm pretty sure that it's not going to explode, but I'll be trying more forward taper going forward
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

Kirkll, jess stuart, Razorbak, rmorris, JDBerry, Crooked Stic, Camp Creek, B-JS, TC209X50 and 16 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©