Is this Osage stave usable

[WyomingWhitetail]

I've had this stave for years but have yet to make a self bow. Have the bug again right now and wanted to maybe make a lower weight bow out of this smaller stave. The cracks have me wondering if it's even usable though.
What do the experts think?

[Pat B]

I would almost guarantee there is a bow in that stave and maybe even a hunting weight bow. If you can get the stave down to the size on that smaller end you should be able to make a pretty good bow. You might even be able to get a light weight bow from the lower part of that smaller end.
 Don't get in a rush but take your time and think ahead about any wood you remove to get you to a workable stave.

[WyomingWhitetail]

What about those cracks. They seem to be seperation between the rings. I'm assuming I'll need to work around those so they don't end up in the finished bow. The natural shape of the stave seems to lend itself to putting the grip there. Could maybe go below them for a smaller bow?

[Pat B]

I think the first thing I'd do is remove the bark and sapwood then chase the back ring. Be sure to seal the back once you expose new wood. Even on a well seasoned stave if you don't seal the back checks can appear. I use spray shellac to seal bow backs. A couple of coats go down easy and remove easily when the time comes. Then lay out the bow on the back. If the cracks end up in the handle area you may be able to work around them. Generally the handle area remains rigid so the cracks may not affect anything but aesthetics. You can fill them with super glue. Clean up the sides so you can see what you actually have to work with.
 Work your way, step by step and at each stopping point readjust your thinking if needed. Post pics as you go so we can see what you have.

[Burnsie]

Chase a ring and see where it takes you. 
That stave looks pretty decent compared to some I've wasted time on.
I should restate that - "compared to some I've learned on"  All the marginal staves I've worked have taught me little tricks for working around knots, twists and turns...etc.  When a nice straight one comes a long, they seem like a breeze.

[Pat B]