Author Topic: Osage recurve 55# @ 28” (Read 3098 times)

Mo_coon-catcher · « **on:** February 14, 2019, 08:01:17 AM »

I don’t think I’ve shared this one yet. Here’s an Osage recurve I had recently finished. It’s part of a pair I had made from a large stave. When I originally laid it out I thought that they wanted a 27” draw. But they wanted 28”, it took a bit more set pulling the extra inch, but not much. I havnt chronied it but it shoots pretty well. Te overlays and brush nocks are water buffalo and the handle wrap was an experiment from elephant hide strips. I had to add the thread wraps as there was a side splinter I couldn’t remove without making a weak point. So some thin CA and lots of thread wrap fixed the issue. I’ll post pics of the other of the pair when I can snap some pics

Thanks for looking,
Kyle

skeaterbait · « **Reply #1 on:** February 14, 2019, 08:22:42 AM »

Crooked Stic · « **Reply #2 on:** February 14, 2019, 08:53:18 AM »

Nice curves and tips.

Pat B · « **Reply #3 on:** February 14, 2019, 09:52:00 AM »

Really nice bow, Kyle and great save with the splinter.

jess stuart · « **Reply #4 on:** February 14, 2019, 09:52:36 AM »

Fantastic. You wood bowyers never cease to amaze me.

Wolftrail · « **Reply #5 on:** February 14, 2019, 11:12:01 AM »

Those statics and brush nocks are really cool .

Garman · « **Reply #6 on:** February 14, 2019, 11:25:34 AM »

Very nice

Flem · « **Reply #7 on:** February 14, 2019, 12:20:16 PM »

Nice job, bow looks great, but I'm liking the artwork. A talent that I am lacking.

Bvas · « **Reply #8 on:** February 14, 2019, 02:45:37 PM »

That cool!!!

Is there any other advantage to the brush nocks other than obviously keeping brush out of the string?

Roy from Pa · « **Reply #9 on:** February 14, 2019, 03:47:50 PM »

Very nice..

TattooDave · « **Reply #10 on:** February 14, 2019, 04:44:15 PM »

Great looking bow Kyle!!

Tattoo Dave

Buemaker · « **Reply #11 on:** February 14, 2019, 05:01:49 PM »

Looking good.

Forwardhandle · « **Reply #12 on:** February 14, 2019, 05:42:49 PM »

Good looking bow there

goobersan · « **Reply #13 on:** February 14, 2019, 05:48:22 PM »

kennym · « **Reply #14 on:** February 14, 2019, 06:24:39 PM »

Cool bow!!

Mo_coon-catcher · « **Reply #15 on:** February 14, 2019, 09:50:52 PM »

Thanks guys!
With the brush nocks, Atleast with this style, I don’t see any effect other than letting brush bounce out instead of catching in the wedge of the recurve. If I did a different style that is more like a string bridge, it would have a noticeable shift in draw weight. Since instead of the string rolling off the hook. It would have an angular lift off that would suddenly make the limbs 4” longer.

Kyle

ztontonz · « **Reply #16 on:** February 15, 2019, 06:26:44 AM »

Nice build

Possum Head · « **Reply #17 on:** February 17, 2019, 09:17:31 PM »

Well done!

ron w · « **Reply #18 on:** February 17, 2019, 10:00:58 PM »

well done

News:

Author Topic: Osage recurve 55# @ 28” (Read 3098 times)

Users currently browsing this topic: