Author Topic: 2018 What did you do today? (Read 205296 times)

Roy from Pa · « **Reply #1200 on:** October 20, 2018, 03:17:20 PM »

What's the crankshaft from?

wood carver 2 · « **Reply #1201 on:** October 20, 2018, 04:39:23 PM »

Nice little jointer. My Dad used to have a 4 inch one similar to that. I wish we still had it. Much safer to flatten bamboo on that rather than on the 10 inch.
Roy, is that a bow I see burning in that fire?

Dave.

Roy from Pa · « **Reply #1202 on:** October 20, 2018, 06:52:32 PM »

Ya Dave, the one ya made me broke.

LOL

Flem · « **Reply #1203 on:** October 21, 2018, 10:10:02 AM »

Quote from: Roy from Pa on October 20, 2018, 03:17:20 PM

What's the crankshaft from?

92' Toyota 3VZE

Dannon · « **Reply #1204 on:** October 21, 2018, 06:43:09 PM »

Put me a simple little arrow holder on the bow I just finished. Paper clip and a small piece of sticky back Velcro. Works great.

Bvas · « **Reply #1205 on:** October 21, 2018, 08:38:08 PM »

That’s pretty slick Dannon.

Not to complicate such a simple design, but many you could add a little bump out to make it easier to move with a gloved bow hand.

Dannon · « **Reply #1206 on:** October 21, 2018, 09:21:41 PM »

Bvas, I was thinking the same thing.

BMorv · « **Reply #1207 on:** October 22, 2018, 10:06:15 AM »

1.5 years and a baby girl later and I finally see light at the end of the tunnel for my workshop!

Testing out a forward handle all wood tri lam after seeing all of the discussion here....

Forwardhandle · « **Reply #1208 on:** October 22, 2018, 10:12:08 AM »

Im liking the profile & riser on that one Ben

Roy from Pa · « **Reply #1209 on:** October 22, 2018, 02:31:06 PM »

Shop looks good and can't wait to see how that bow turns out.

But how are you gonna shape the backside of the grip?

Ya gonna glue on another piece on the belly side?

monterey · « **Reply #1210 on:** October 22, 2018, 02:56:55 PM »

Very sexy!

Just some mundane chores today. I'm converting one of my rubber band forms to a topless hose form and doing a dry run at the same time.

The material in the form is for an ASL for my cousin. This form builds a somewhat nontraditional ASL that has a lot of pyramid features to it.

Glue up this week.

BMorv · « **Reply #1211 on:** October 22, 2018, 03:13:50 PM »

Going to add about a 3/8" thick piece to the belly side Roy. Going to net out about 3/4" more draw with no extra stress on the bow by doing it this way. At least that's the plan....

Forwardhandle · « **Reply #1212 on:** October 22, 2018, 03:31:03 PM »

Mike the form & bow look great just curious what mods are you doing to the form ? Ben that design looks awsome I thought about doing one like that with maple osage and sinew can't wait to here your report !

monterey · « **Reply #1213 on:** October 22, 2018, 04:23:53 PM »

Having been rubber band form, the side bumpers were taller. Taller than needed but with rubber bands there is no concern about interference with the hose.

Here's how it looked before.

I also knocked the softwood dowels out and replaced them with hardwood.

Forwardhandle · « **Reply #1214 on:** October 22, 2018, 04:44:24 PM »

I get it ,easy mod ,I know you glue up at a lower presure then me but my wood pegs popped while it was in the oven, but I think curvier bows put compound pressures on the pegs ! sounds like a nice bow you got going !

monterey · « **Reply #1215 on:** October 22, 2018, 08:28:07 PM »

Oh, something usually goes wrong. But it'll be a bow.

Roy from Pa · « **Reply #1216 on:** October 23, 2018, 05:16:56 AM »

Xs 2, Mike.

I haven't made that perfect bow yet...

Crooked Stic · « **Reply #1217 on:** October 23, 2018, 08:03:36 AM »

If we did a perfect one then we probably would have no more fun trying.

Shredd · « **Reply #1218 on:** October 23, 2018, 10:08:53 AM »

Quote from: Roy from Pa on October 23, 2018, 05:16:56 AM

I haven't made that perfect bow yet...

I can see that...

Truth said, me either...

Roy from Pa · « **Reply #1219 on:** October 23, 2018, 10:17:01 AM »

LMAO smarty pants..

News:

Author Topic: 2018 What did you do today? (Read 205296 times)

Shredd

Users currently browsing this topic: