3Rivers Archery




The Trad Gang Digital Market














Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters




RIGHT HAND BOWS CLASSIFIEDS

LEFT HAND BOWS CLASSIFIEDS

TRAD GANG CLASSIFIEDS ACCESS


Main Menu

Big Fletching

Started by Pine, March 01, 2015, 02:56:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Pine

So about a year ago I was at the archery shop shooting . The owner knew that I was having trouble finding 105# cedar arrows and came up to me with some cedars fletched with 5 1/2" parabolic feathers . I was shooting my 60# recurve and he said to try these arrows . They shot just fine . No fishtailing at all . He then he told me they were 85# spine . I was very surprised . He explained to me that the 5 1/2" parabolic feathers stabilized the arrow quickly and would be just fine for hunting as long as the shot was further than 10 feet .
So have any of you had any experience with this ?
I have been thinking of trying this only because I still have a hard time finding 105# cedars and I don't like hard wood .
It's easier to fool someone than to convince them they have been fooled. Mark Twain

If you're afraid to offend, you can't be honest.

TGMM Family of the Bow

Zbone

Been shooting 5-12" high back shields for years and about the only cut I use on a broadheaded hunting arrow now...

Orion

The more fletch, the more quickly it stabilizes (and slows down) the arrow.  Of course, a well tuned arrow that leaves the bow with less flexing is better than compensating with a lot of fletch, thoughthe latter does work.

Why are you shooting 105# cedars out of a 60# bow?  Are you sure they are 105#.  Aside from Sweetland forgewoods, I've never seen standard size cedars make that weight.  

Even with a fast flite string, and cut to or past center shelf, something in the 80-85# range should work.  Could also build out the arrow plate to accommodate lighter spined shafts.

Pine

I have always shot about 10# heavy , G Fread Asbell has the same problem . My 50# likes 75-80# spine , just what I have learned to live with .
My 60#der can shoot a 105# bare shaft like a laser .
It's easier to fool someone than to convince them they have been fooled. Mark Twain

If you're afraid to offend, you can't be honest.

TGMM Family of the Bow

Terry Lightle

Have been shooting 5 1/2 inch tall shields for 30 years at least.When it is really cold and been out there a long time I want all the help I can get when I turn one loose.And my bow is shooting a bare shaft great .Terry
Compton Traditional Bowhunters Life Member

monterey

I shoot 5.5 high backs of various shapes with good results. Once I tried some 7" really high backs out of a 45" LB.  would not tune.  Eventually I cut them to 5.5" and they flew beautifully.  My conclusion was that you can try to push too much feather through the window.
Monterey

"I didn't say all that stuff". - Confucius........and Yogi Berra

Tradcat

I just finished an experiment and testing (4)x 5" parabolics against (3)x 5 1/2" high back shields. 20" of stabilizing feather against 16.5". I found that even if I plucked the string, the arrows were flying true with the high back shields. I am shooting 3 under and am amazed at how well the arrows are flying. Like a Payton Manning spiral ! I am shooting a 64" Robertson Purist 54# @ 26". CE Heritage 150's with 250 grains up front. Bare shafts and fletched arrows( 3 x 5 1/2" high backs) are grouping from 18 yards ! I think I'm tuned !

Firstlight

Event thous I bare shaft test, etc and get my shafts tuned to the bow, I still shoot 5 1/2 fletch, shield cuts.  I like the look and I like to see them fly.  Nice arch to them :>)

I know I could shoot 3 or 4 inch but I will stay with 5 1/2 as I like everything about them.

I also know if I have a poor release that the extra fletch will only help.


Contact Us | Trad Gang.com © | User Agreement
Copyright 2003 thru 2025 ~ Trad Gang.com ©