Tips and tricks thread

[Roy from Pa]

LOL, that's a catchy tune:)

[Buggs]

The whole album is good. Makes me miss the 70's


I wanted to add this pic

Its 1/2"  white 3M, used floor buffing pad I cut up and use for bleeder/breather cloth. It soaked up a lot of resin this run and it has an interesting look to it. Reminds me of granite or some other stone. Don't know what I would pair it with, but its interesting to see all the different looks you can get with unlikely materials.

[Buggs]

Figured I would post this, just in case anybody out there likes to watch paint dry or faucets drip



It went fast with the biaxial tubing. Also surprised how easy it is to access ytube and upload videos. I might be the only one happy about that

[Roy from Pa]

I guess it was ok:)

[Jon Lipovac]

Thought I would share how I set up my Rigid spindle sander since quite a few newer guys like myself start out with something like this.
I took a 1/2” Baltic Birch sheet and inlaid a thin collar with a flange to fit very close to the spindle. I had my friend, that machined the collar, also machine 6 additional rings, incrementally thicker so I could grind larger or smaller offsets from my pattern jigs. These come in handy when you choose accent stripes of different thicknesses.

My normal accent stripes have been just (2).031 G10 strips. I recently did my first mosaic accent which was significantly thicker at .145

[onetone]

Here is a measuring tip. I was recently gifted a large selection of dyes from an extremely nice fella and wanted to do some sample boards to get familiar with the colors. The problem is mixing tiny batches accurately for repeatable results. The solution? measure the solvent with little syringes!

You can get these on the web or at pharmacies and places that sell large animal supplies. They say for oral use only and have what's called a Luer tip. But they make needles with a Luer lock fitting, so these are also handy for injecting adhesives into tiny spaces. They measure down to .1ml 
I originally started using these with conversion varnish and other catalyzed paints and finishes. Real handy if you want to catalyze 2 or 3 ozs of finish and have no way to measure or weigh, .1oz of hardener. Metric system is much more useful, especially down at the small end of the scale.

Syringes have many uses in the shop. I use an inexpensive white plastic syringe to apply glue to arrow fletches. Keeps things neat, minimizes waste, easy to refill and lasts a couple of years. Have a high tech unit on hand for diverse applications.

[Nicholi]

Have any of you tried using a router with a template to rough out limbs?

[Buemaker]

I do not know if this is the right place to post this, but useful info. Sometimes on other sites you see people claiming hilarious speed from their bows and in many cases they do not know the correct way to make a speed test.
https://www.tradgang.com/tgsmf/index.php?topic=34418.msg550892#msg550892

[kennym]

Lighting will also make some wild speeds

I use a light on the chrony to get consistent results . 

I’ve also read you should black the field tip to help .

[Buemaker]

I bought special indoor lights for mine. Fluorscent light tubes can really mess up things. Outdoors they say the Chrono should have a clear view of the sky on an overcast day.

[kennym]

Mine came with a cardboard diffuser and a special bulb

[Buemaker]

Small tip. Over the the years my air hose had gotten some glue blobs that was hard to remove, so when I started with a new one I wrapped it with thin kitchen plastic when it was pumped up. Just leave the plastic in place.

[Crooked Stic]

I take my used 6x80 belts cut cross ways rip them in 1 in. Wide straps for shoe shine sanding tip overlays. A flexible rasp.