I would like some suggestions about how to chain a ladder stand to a tree. For those of you who have done so, do you use a turn-buckle to tighten the chain. Really want to replace all ratchet straps with something more permanent. Appreciate any and all how-to's!!
Use both. Ratchet strap to get it snug, then a chain for reassurance. Stainless turnbuckle to tighten the chain. Check it each time when you climb.
Thanks Bud, I have multiple ratchet straps on the ladders. The chains are not at all for theft protection. Just added security. I am mostly curious, since I do not weld or have that available, is how to actually chain the stand to a tree. All these stands are currently in place with multiple straps. I guess I can get some chains with hooks, and I would need to explore turn-buckles more. not sure how the chain attaches to the turn buckle. I am sure this is doable. We only have cedar trees, and they do not grow much, so although they would need to be inspected regularly, and perhaps adjusted minimally, I am not too concerned with tree growth. I am really just looking for ideas to attach chains to the ladder stand and tighten them. Appreciate your response
I use this type mini chain binder to cinch a chain to a ladder stand. Mine came off of an old 70s era tree stand. The chain has a hook on one end that hooks to one side of your stand and then use the chain binder on the other end. Much quicker and more cinching power than a turn buckle.
http://www.amazon.com/Koch-098002-Utililty-Tightener-Working/dp/B002PNLIJM/ref=sr_1_7?s=industrial&ie=UTF8&qid=1448401706&sr=1-7
I use good strap,then chain with bolt.I was tightening a turn buckle on a hang on and must of over did it,when I stepped on platform fell 20 plus feet.Just dont over tighten.
Get a turnbuckle with hooked ends, or eyes and secondary hooks.
I like the bolt idea, but getting the chain tight is needed. Then use the bolt.
I leave the strap also,so not a problem with being safe.Plus ladders are a lot stabler then other stands.I use the chain and bolt more of a backup,the strap keeps it tight.
how bout a chain binder---
I use a galvanized chain with aluminum turnbuckle. I leave the strap on also. Loosen chain ever year so tree doesn't grow around it.
QuoteOriginally posted by reddogge:
[QB] I use this type mini chain binder to cinch a chain to a ladder stand. Mine came off of an old 70s era tree stand. The chain has a hook on one end that hooks to one side of your stand and then use the chain binder on the other end. Much quicker and more cinching power than a turn buckle.
I use the same thing,works great!
Ratchet strap for safety, chain it for the damn thieves.
Heck, just wrap it around the stand and tree, put a long bolt thru a link on one end and a fairly close link from the other end and slap a washer and nut on it and tighten it up. Use a locking nut (built in plastic ring), whatever it is called so it won't work loose.
Sounds easy to me.
ChuckC