Does anyone modify the rubber inside the great northern quiver in order to make broadheads not get stuck in there. I'm worried the rubber is going to dull my blades faster than foam and the arrows, once securely in place are harder to grab out of the quiver because the rubber pinches the heads. Thoughts? Mods?
Thanks,
Kevin
I like it! I use a broadhead to cut the initial holes in the foam, then resharpen that head, and my broadhead arrows always go back in in the same place.
I have used GN quivers for years, and never had any issues with my BH's not being sharp enough.
Bisch
No.
Thanks Bisch!
I will make some bigger slits in the rubber.
Solid advice from Bisch!
I once removed the rubber from the foam, then quickly regretted it. I feel that the rubber extends the life of the hood foam, plus it helps to keep my arrows in place when traversing and stalking through the thicker vegetation.
QuoteOriginally posted by Bisch:
I like it! I use a broadhead to cut the initial holes in the foam, then resharpen that head, and my broadhead arrows always go back in in the same place.
I have used GN quivers for years, and never had any issues with my BH's not being sharp enough.
Bisch
Yep. exactly what I did.
I'm with the others - the neoprene on the foam drastically extends the life of the foam. Once your slot is cut, I've never noticed it dulling my heads.
Never noticed my heads being dulled by mine....
The rubber keeps them in tight. I like that.
What Bisch said
double post!
My rubber pretty much fell out on its own. I left it off and don't miss it. The grippers are plenty to keep my arrows secure.
I found the foam that comes with the GN quiver noisey when removing a broadhead tipped arrow, and replace it with a high density foam the local kayak shop.
When I start a new GN I heat on a candle a broadhead with the same style I plan to hunt with, then I make the cuts where the tipped arrows will be. Easy on and off same position and no dull blades.
QuoteOriginally posted by cacciatore:
When I start a new GN I heat on a candle a broadhead with the same style I plan to hunt with, then I make the cuts where the tipped arrows will be. Easy on and off same position and no dull blades.
X2...thats exactly what I do. Heat a broadhead up that I plan to use till its really hot...and it melts the perfect form into the foam. Then the new heads will slide in perfectly.
I use a sharp broadhead covered with some Vaseline to make the slit in the rubber. You will want to pay attention to the fletching position/orientation to minimze/eliminate the feather rustle between adjacent arrows at the shot. You can do this by shooting with field points in your arrows and taking a picture after you found that sweet spot where there is no noise. I am assuming that like me you position all your broadheads in the same orientation on the arrow.
I always put some Vaseline on the rubber gripper slots as well to eliminate a possible squeak when you remove the arrow. Murphy's law was originally "named" by a bowhunter. This naming probably occured in cold weather with a few expletives.
I also put a dab of Vaseline on the bottom side of the rubber gripper so I have some along and can quiet a newly developed squeak. A little dab 'll do ya!
As a note, I have been using the SAME GNBCO strap-on quiver on my bows since 1999. I have not had to replace the foam, gripper, or the straps.
QuoteOriginally posted by 9 Shocks:
Does anyone modify the rubber inside the great northern quiver in order to make broadheads not get stuck in there. I'm worried the rubber is going to dull my blades faster than foam and the arrows, once securely in place are harder to grab out of the quiver because the rubber pinches the heads. Thoughts? Mods?
Thanks,
Kevin
Funny, I saw this post a few days ago and did not pay much attention. I made my slits in the foam in my new quiver and even thought of your post.
This AM I went to remove a BH tipped arrow and boy was she determined to stay at rest in the quiver. Like a dummy I carefully placed my thumb to hold the rubber quiver insert out of the way. Well a gentle nudge turned into a tug. Next thing I know that sharp A$$ BH found it's way to the bone in my right thumb. I just got through stopping the bleeding and got my thumb all bandaged up. Now time to add insult to injury, I had one hell of a blood trail to clean up.
I will be modifying the BH slits to make them larger so my BH's don't get stuck anymore. If that don't work I will be replacing the rubber quiver insert with one made from a Yoga block foam, it works the best anyways.
Be careful!!!
QuoteOriginally posted by Steve O:
No.
Same here, best quiver out there. Been using them exclusively since they came out with the original four arrow strap-on in the mid 90's. Never had an issue dulling broadheads. If you're worried about the rubber, they make an all foam insert without the rubber for their Sidekick Quiver.