Can you unscrew the bushings and remove them, remove the limbs for transport without changeing the tiller.
Absolutely, just make sure that the set screws for the limb bolts are tightened.
As said unscrew the finger bushings and slide limbs off, leave limb bolts alone/locked in place. Also keep string from untwisting.
Allen, I will have to look at it. I did not know there was set screws.
Yep. They hold the limb bolt in place to keep it from moving. :biglaugh:
Yep, two set screws per limb bolt. They are located on each side of the riser, just belob the limb bolt.