Trad Gang

Main Boards => PowWow => Topic started by: Coach Jones on July 11, 2015, 11:22:00 AM

Title: Broadhead Adapter
Post by: Coach Jones on July 11, 2015, 11:22:00 AM
Want to use Zwickey Eskimo glue on heads with my CE Heritage 90's shafts.  Need to get to 200 grains.  So which adapter brass or steel?  I am assuming brass 5/32 75 grain.
Title: Re: Broadhead Adapter
Post by: kevsuperg on July 11, 2015, 11:27:00 AM
Are the eskimos 130 gr.then add 75 gr.  I like brass . just my preference.
Title: Re: Broadhead Adapter
Post by: Alexander Traditional on July 11, 2015, 11:36:00 AM
I like glue on heads. I've found since i've started using them,that I prefer the long ones. In my mind they fill up the whole portion of the female end of the broadhead,making them easier to mount straight and I feel that they would be stronger. If you get the Eskilite at 110grains and use a steel 100 grain adapter that would get you real close.
Title: Re: Broadhead Adapter
Post by: Michael Arnette on July 11, 2015, 12:23:00 PM
I'd use the 75 grain steel adapters and that should put your Eskimos at 200. You can get them from the nocking point:
http://www.thenockingpoint.com
Title: Re: Broadhead Adapter
Post by: Michael Arnette on July 11, 2015, 12:24:00 PM
Steel is much more durable in my experience