Trad Gang

Main Boards => PowWow => Topic started by: Shinnecockfly on March 14, 2015, 05:17:00 PM

Title: Introduction and bow riser cracking
Post by: Shinnecockfly on March 14, 2015, 05:17:00 PM

Hey everybody my names Mike, I was born and raised here on eastern Long Island. Spent most of my life fishing with either a fly or a plug and have always loved being outside. Not being from a hunting family I have no hunting or archery experience, but I picked up a recuvre this fall and am obsessed now just like the fly fishing. Been shooting everyday an plan on hunting for the first time this year for whitetail and turkey with my recurve or long bow. And I must say this is one of the polite and knowledgable forums I've ever come across!!!!

I shoot a Martin hunter 50#@28 and a Martin savannah stealth 40#@28, my draw length is 30.5". Been really favoring the longbow recently so smooth to draw and shoot. I just purchased the savannah stealth about a month again new and am starting to get concerned. New out of the box the bow had rough upper nock grove (which I sanded smooth), a tiny pin hole in the lower nock and more importantly what appeared to be a crack in the riser on the handle. I though it was a defect in the finish but I don't know if I'm seeing things or what but the crack might be getting larger. I can run my nail over it and feel it but it's been like that since I first received it.

Anyway I can easily return the bow and ask for a new one I believe but I thought I'd ask the very knowledgable members on the site. I've been watching it since I first unbox it but now I measured it to make sure it isn't growing in size.
Thanks, Mike
 (http://i59.tinypic.com/dngkg3.jpg)
 (http://i58.tinypic.com/2cyfk82.jpg)

Title: Re: Introduction and bow riser cracking
Post by: Fastltz on March 14, 2015, 05:47:00 PM

If you can return it I would. Why chance it blowing up. However if you cannot you can get some of the very runny super glue and let it soak down into the crack and it will set up.

Title: Re: Introduction and bow riser cracking
Post by: Blackhawk on March 14, 2015, 06:02:00 PM

Contact the bowyer and take his advice before doing anything.  Any repairs could void the warranty if anything happens, and I would not shoot it until it has been returned or corrected by the bowyer.

Title: Re: Introduction and bow riser cracking
Post by: Bernie B. on March 14, 2015, 09:08:00 PM

x2 what Blackhawk said.  By the way, nice arrow group!

Bernie

Title: Re: Introduction and bow riser cracking
Post by: macbow on March 15, 2015, 05:40:00 AM

Agree, call and return. On a new bow should not have to worry about it.
Looks like there is no reinforcing like Mylar etc.
I did a little modifying on a similar riser and it broke in half.

Title: Re: Introduction and bow riser cracking
Post by: Homebru on March 15, 2015, 11:41:00 AM

Welcome to Tradgang.  Now send that bow back!  If you bought it new, you should be "satisfied".  If you're posting this here, you're not "satisfied".  

Hope this helps.
homebru

Title: Re: Introduction and bow riser cracking
Post by: Zradix on March 16, 2015, 09:12:00 AM

Quote

Originally posted by Fastltz:
If you can return it I would. Why chance it blowing up. However if you cannot you can get some of the very runny super glue and let it soak down into the crack and it will set up.

x2

And welcome!   :campfire:

Title: Re: Introduction and bow riser cracking
Post by: Shinnecockfly on March 16, 2015, 01:04:00 PM

Thanks for the adivce everyone, I just contacted the company I purchase the bow from and sent photos. Boy am I happy I have 2 bows otherwise I'd be going through wothdrawls right now!!!   :knothead: