Trad Gang

Main Boards => PowWow => Topic started by: david janssen on March 02, 2015, 07:56:00 PM

Title: Alluminum arrow size for my 66 Grizzly?
Post by: david janssen on March 02, 2015, 07:56:00 PM

A few weeks ago I purchased a 1966 Grizzly 45#.I only draw 26" and wondered what size alluminum arrow would work best?I would like to use either a 125gr or 150 gr broadhead.How long should they be cut?


Thanks for the help,

David

Title: Re: Alluminum arrow size for my 66 Grizzly?
Post by: the rifleman on March 02, 2015, 08:05:00 PM

You might try 2016s.  I would start w full length and bareshaft to final length.  I am finding out that for me a starting point is really a good guess.  Your bow will tell you what it will shoot for you.

Title: Re: Alluminum arrow size for my 66 Grizzly?
Post by: Cyclic-Rivers on March 02, 2015, 08:19:00 PM

Cant help you with Arrows but have held that bow and its sure a beauty!   :thumbsup:

Title: Re: Alluminum arrow size for my 66 Grizzly?
Post by: KyStickbow on March 02, 2015, 10:08:00 PM

I would say a 1916 would work for you. I shoot 40# with a 27" draw length and use 1816's. Either of those would proly work..but my guess is the 1916 would get you where u want to be.

Title: Re: Alluminum arrow size for my 66 Grizzly?
Post by: IronJohn on March 03, 2015, 06:47:00 AM

Cut them 27" and use the 125 point. They will fly like darts.......IJ

Title: Re: Alluminum arrow size for my 66 Grizzly?
Post by: dbd870 on March 03, 2015, 07:35:00 AM

I'd go with 1816's if you are going to cut them 27" or so.