Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: Jon Stewart on January 25, 2015, 12:37:00 PM

Title: uni bushing glue
Post by: Jon Stewart on January 25, 2015, 12:37:00 PM
What glue should I use to glue uni bushings into aluminum arrows?
Title: Re: uni bushing glue
Post by: JRY309 on January 25, 2015, 12:49:00 PM
When I converted some aluminum wih a swaged nock end to a uni-bushing I just used a slow cure epoxy like I use on my carbon arrows.I just use a hot melt for the front insert for ease of removing later.
Title: Re: uni bushing glue
Post by: Jon Stewart on January 25, 2015, 03:23:00 PM
Thanks
Title: Re: uni bushing glue
Post by: JamesV on January 25, 2015, 05:03:00 PM
JB Weld
Title: Re: uni bushing glue
Post by: joe skipp on January 25, 2015, 05:13:00 PM
Listen to JamesV...
Title: Re: uni bushing glue
Post by: BOWMARKS on January 25, 2015, 08:21:00 PM
I have not found gluing is required .

Any that I have used all have a very tight press in fit.
Text only | Text with Images