Trad Gang

Main Boards => PowWow => Topic started by: Stone Knife on January 23, 2015, 07:23:00 AM

Title: 1913 Alu. shaft?
Post by: Stone Knife on January 23, 2015, 07:23:00 AM

Is there 1913 alum. shafts still available that are swaged to take a classic nock, or do they make a nock for the for the uni bushing that would be comparable, I don't want the nock too tight.

Title: Re: 1913 Alu. shaft?
Post by: JRY309 on January 23, 2015, 08:32:00 AM

I don't think they are still being made with a swaged nock end.You would have to find some NOS.The uni-bushing Easton makes for 1816,1913 and 1916 is called a X-bushing that will accept a X-nock.Same nock that is used for Axis/MFX.Bohning's verison is called an A-nock.The Bohning A-nock has a slightly larger throat then a Easton X-nock.I think they also make a G-bushing for them also,then you can use a large groove G-nock with a .098 throat.