What has other archers used for placing a clicker on? Iv tried tape but it makes the clicker load, rattles on limb when I shoot. I tried super glue but it came off after about 50 shoots today. Any help? Thanks.
3m two sided tape with a wrap of electrical tape for peace of mind.
Steve
Clean limb mount area with alcohol. Use two sided tape. If your clicker still has the chain attached, replace with rope. To further reduce noise place a small piece of tape on the "clicker".
I have been using 20# double sided tape I got from home depot. I get rid of the chain also.
Use double sided tape, but take electrical tape and wrap on bow, stick on clicker, then wrap once more over clicker when the tongue of clicker is raised out of way. Won't fall off, and doesn't hurt finish. No rattles
Also I remove the bead chain ASAP. That'll chip a finish
I remove the chain and use cord. Wrap the clicker spring with one wrap of electrical tape. Use outdoor rated double sided tape to attach to the bow..