Trad Gang

Main Boards => PowWow => Topic started by: jtelkboy on September 27, 2007, 02:07:00 PM

Title: axis shafts for 61lb@28in longbow
Post by: jtelkboy on September 27, 2007, 02:07:00 PM

i am considering trying 340 axis shafts for my 61lb@28in longbow.  with 150 gr screw in woodsmans with 100 gr inserts,  wrapped and with 4 inch feathers, cut to 29.5 or so.  any thoughts?

elkboy

Title: Re: axis shafts for 61lb@28in longbow
Post by: Shawn Leonard on September 27, 2007, 02:54:00 PM

May be a tad stiff unless the bow is hard R/D and cut past center. Shawn

Title: Re: axis shafts for 61lb@28in longbow
Post by: Dan_da_man on September 27, 2007, 03:11:00 PM

My buddy shoots 63@28 with Beaman 400's @32" with 125 up front on an R/D longbow and is a little on the stiff side.