Trad Gang

Main Boards => PowWow => Topic started by: hardtimes on September 18, 2014, 08:18:00 AM

Title: draw length question for a Bear
Post by: hardtimes on September 18, 2014, 08:18:00 AM
Thinking about picking up an old Bear Grizzly. Bow is 58" my concern is my draw length is 30.5 inches. I am thinking it is too short but wanted to ask others for their opinions.

Thanks
Ray
Title: Re: draw length question for a Bear
Post by: Rob DiStefano on September 18, 2014, 08:23:00 AM
you can make it work but the results won't be optimal and yer pushing the platform design of that bow.
Title: Re: draw length question for a Bear
Post by: stagetek on September 18, 2014, 10:40:00 AM
I draw 30.5, and am more comfortable and a better shot with 60-64" bows. I've hunted turkeys out of a pop-up with a 52" K-mag. It worked, but I know I was leaning my head forward to get my finger to the corner of my mouth.
Title: Re: draw length question for a Bear
Post by: bowslinger on September 19, 2014, 12:26:00 AM
I have a 58" Bear Grizzly and a 28.5 draw length and can tell you I much prefer a 60" to 62" recurve.  Finger pinch is an issue for me with this bow. I shoot longer Bear recurves much better.

If you can find one in your price range, I highly recommend a Damon Howatt Hunter, which has a 62" draw length.  It is a very smooth drawing bow and at your draw length, should be more comfortable with regard to finger pinch.
Title: Re: draw length question for a Bear
Post by: damascusdave on September 19, 2014, 12:37:00 AM
Second the DH Hunter...I paid 200 bucks for mine in like new condition...btw I draw as much as 31 inches depending on bow weight...my favourite bow though is this 64 inch Bear...if you get a chance pick one up

DDave

 (http://i849.photobucket.com/albums/ab54/damascusdave_2009/P8032494.jpg) (http://s849.photobucket.com/user/damascusdave_2009/media/P8032494.jpg.html)
Title: Re: draw length question for a Bear
Post by: 59Alaskan on September 19, 2014, 06:10:00 AM
I am a huge fan of Bear Grizzlys but I would not recommend a 58" model for your draw length.  A 62" Grizzly (1963 and prior) would be a far better choice, or the DH Hunter, or a 64" Bear
Title: Re: draw length question for a Bear
Post by: WESTBROOK on September 19, 2014, 08:07:00 PM
I love the Grizzly's too but frankly 29" is about it.

I've been wanting one of the 64" Super K's...green of course.

Eric
Title: Re: draw length question for a Bear
Post by: nineworlds9 on September 19, 2014, 08:20:00 PM
Forget the Grizz with that DL.  I draw 29ish and a Grizz stacks like a mofo after that far.  Past 29" you're losing efficiency on the stored energy and the string angle is getting too close to 90 degrees.  Get something longer or a 58" design that is specifically built to go to 30"+, but there are few if any that can.

You're best off with minimum a 60" vintage, better yet a 62" for sure.
Title: Re: draw length question for a Bear
Post by: hardtimes on September 22, 2014, 02:04:00 PM
Thanks for the replies fellas. I passed on the Grizzly. I knew it was too short, but sometimes I can't listen to myself.