Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: Jon Stewart on September 03, 2014, 05:08:00 PM

Title: aluminum shaft ??
Post by: Jon Stewart on September 03, 2014, 05:08:00 PM
Anyone know what aluminum shaft ahs an inside diameter of 86 thousands?
Title: Re: aluminum shaft ??
Post by: Hermon on September 03, 2014, 05:37:00 PM
Are you sure you mean 86 thousandths (.086)?

That is awfully small.  No aluminum arrow that I am aware of has an inside diameter that small.  A 1214 shaft would have an inside diameter of around .1595" I believe. (12/64" = 0.1875 minus .028 = 0.1595).  You are wanting almost 1/2 of that.
Title: Re: aluminum shaft ??
Post by: Jon Stewart on September 03, 2014, 05:42:00 PM
OK, lets try .86/100's
Title: Re: aluminum shaft ??
Post by: Hermon on September 03, 2014, 05:50:00 PM
Now you have gone off the other end.  A 2712 shaft would have an inside diameter of 0.3978 if my math is correct (27/64" = 0.4218 minus .024 = 0.3978).  Now you are wanting over twice that.  

What are you trying to do?
Title: Re: aluminum shaft ??
Post by: Jon Stewart on September 03, 2014, 07:03:00 PM
Solved my Mr. Hermon. It was  .286 for a 2013.

This place ins kind of handy.

Thanks.
Title: Re: aluminum shaft ??
Post by: JimB on September 03, 2014, 07:06:00 PM
 (http://i10.photobucket.com/albums/a140/jbrandenburg/scan-22.jpg) (http://s10.photobucket.com/user/jbrandenburg/media/scan-22.jpg.html)
Text only | Text with Images