If you had to choose a 200 grain broadhead for a 44# bow, shooting GT 35/55 @ 30.5", and pulling 29.5 inches, what would you shoot?
Thanks and God Bless
VPA or 190 Simmons Treeshark
Something with two edges that I was able to get and keep sharp.
But, as yet, the chances of me shooting a head that heavy are slim. I use Douglas fir shafts so the weight is in the shaft.
Tusker Aztec screw in.
A Zwickey Delta with a 75 gr steel adapter.
Good Shooting,
Craig
German Kinetics, expensive but best head you can shoot.
I was thinking the GK as well. I have a good number of them just because :)
When in doubt, these heads make anything a super penetrator it seems
http://www.grizzlybroadheads.com/
Simmons safari with a long adapter will put you at 205.
QuoteOriginally posted by Kirkll:
http://www.grizzlybroadheads.com/
155gr. Grizzly with a long adapter will put you right at 200gr. That' s the setup I'm using this year. :thumbsup:
Bill
another good one is the 200 grain ace
all joe---
these have a wicked factory grind and hold an edge
http://vintagearcheryco.com/shop/index.php?main_page=product_info&cPath=4&products_id=36
160 grain ACE head with a 40 grain adapter
I like the 180 Grizzly. For my all around shooting I will probably drop down to 160 grains.
After years of shooting a certain weight it is hard for me to switch to a heavy foc shaft. I have played around with 340 FMJ with about 250 up front, and they fly nice but the trajectory is hard for me to get used to. Just me I guess.
I normally shoot Razorcaps which have weight change ferrules. However, I got half a dozen of the new Grizzly Instinct 3blade in 200 grains. Bear season opens here next week so I will hopefully be able to give an evaluation of how they perform. So far they shoot really well and take a really nice edge.
QuoteOriginally posted by Alexander Traditional:
VPA or 190 Simmons Treeshark
x2
tusker concorde with the appropriate insert
I am really leaning towards the Simmons 165 grain interceptor/safari heads with a 42 grain adapters. Do y'all think I have enough horsepower to push though deer with these heads if I keep my shots under 20 yards? Thanks
I was shooting a 45@28" and had added 60 grains to my set up for 250 grains,and mine went through both lungs of a whitetail. I'm pulling a little more than 28" though,but I think you should be all right. I shot the Tree Shark and it's wider than the Intercepter.
Simmons Safari is what I shoot from my 47 # centaur. Looks long and lean yet is still 1 9\\16". You will get awesome penetration and big blood trails
ACE super express hands down.
QuoteOriginally posted by Bow man:
160 grain ACE head with a 40 grain adapter
sweet!!!! or if he wants a glue on get the 200gr ACE super express
Muzzy Stainless Steel Phantom 220 grain. Remove the bleeder blade to make it a 200 grain 2 blade. I have had good penetration and durability using the 125 grain as a 2 blade 100 grain. Main blades resharpen well.