Curious what nock height works best for you guys shooting Black Widows split finger?
my psa works for me at 3/8-1/2"
5/8" on my PMAX 64"
QuoteOriginally posted by bigiron:
my psa works for me at 3/8-1/2"
right on! split is always right between 3/8 and 1/2 for me as well!
my advice is start at 5/8 and head down.. go a LITTLE at a time.
Most of us will be different, BUT notice we all are pretty close to the 1/2" mark.
3/8 works for me with 5/16" shafts
3/8 for me as well
5/8 ths. for my PSAX's.
Of course how you release the string will have some to do with your best nock locator position.
This is one of the easiest things to check and adjust. I paper tune. Put newspaper, easel pad paper, wrapping paper, etc. taped or clipped to a frame (open ended cardboard box, picture frame, or special PVC frame). Frame could be about 24"x24". Set it up at shoulder height and shoot from about 6-8 foot away. Make sure your backstop is at least a complete arrow length from the paper.
High tear, lower the nock locator. Low tear the opposite. Move the locator about 1/16" at a time.
I shoot 3 fingers under. I always start at 5/8" high. I rarely have to adjust. I've owned and tuned 3 widows; PSA, PCH, and PA.
QuoteOriginally posted by bigiron:
my psa works for me at 3/8-1/2"
X3