Trad Gang

Main Boards => PowWow => Topic started by: scruff on August 10, 2014, 12:17:00 PM

Title: Tabs
Post by: scruff on August 10, 2014, 12:17:00 PM
Why do folks have to change a great product? I have been shooting the Neet pinch free super leather tabs for decades.  I just bought 2 more.  The new tabs are thicker and stiffer and I  do not shoot them as well.  Does anyone know where I can get some of the "old models", they have  the grayish colored backing.  Alternately, does anyone have a recommendation for a slick faced split faced tab with a finger spacer?
Thanks
Scruff
Title: Re: Tabs
Post by: bowhuntingrn on August 10, 2014, 12:34:00 PM
This is the first one I'd check out. I recently picked on up on a recommendation from a friend and still on the fence about it, but only because I've always been a glove shooter. The cordovan surface is slick as can be and the product appears very well made.  http://www.3riversarchery.com/Cordovan+Leather+Shooting+Tab_i5088X_baseitem.html
Title: Re: Tabs
Post by: scruff on August 10, 2014, 02:09:00 PM
Thanks
Title: Re: Tabs
Post by: JRY309 on August 10, 2014, 04:53:00 PM
My favorite tab is a Bateman single finger hole cordovan tab.Been shooting the same tab for 5 years now.
Title: Re: Tabs
Post by: SS Snuffer on August 10, 2014, 08:05:00 PM
I will let you know, I just ordered one from Land caster. It will be here Mon.
I hope it's like the old ones that's all I have shot for years!
Title: Re: Tabs
Post by: Roadkill on August 11, 2014, 12:02:00 AM
You might try to remove the ca't pinch spacer, then carefully use a belt sander to thin it down.  I do this to mine.  It works for me
Title: Re: Tabs
Post by: Roadkill on August 11, 2014, 12:09:00 AM
You might try to remove the ca't pinch spacer, then carefully use a belt sander to thin it down.  I do this to mine.  It works for me
Title: Re: Tabs
Post by: Meathook 1 on August 11, 2014, 05:03:00 AM
Dennis,let me do some checking I might have a few somewhere.

                        Terry
Title: Re: Tabs
Post by: TGbow on August 11, 2014, 10:42:00 AM
Kustom King carries some tabs that might be what you're lookin for.
Title: Re: Tabs
Post by: Bladepeek on August 11, 2014, 11:32:00 AM
I bought one of the Bateman Cordovan 3-under tabs and really liked it. Meantime, I've tried going back to shooting split. I will definitely buy one of the Bateman tabs for split. Not expensive and I get a really clean release off that Cordovan. Plus, even after it gets broken in, it remains nice and slick. The surface just doesn't get chewed up.
Title: Re: Tabs
Post by: Longbow58 on August 11, 2014, 02:05:00 PM
Bateman cordavan face tab single hole w/divider. My favorites also bought 2.
Title: Re: Tabs
Post by: scruff on August 13, 2014, 08:38:00 PM
Thanks
Title: Re: Tabs
Post by: on August 13, 2014, 10:39:00 PM
Saunders Pak-Tab!

Broke in out of the box, impervious to moisture, virtually scent free, and slicker than owl poop!

Bisch
Title: Re: Tabs
Post by: screamin on August 13, 2014, 11:35:00 PM
That Bateman is a good tab but mine was so old and broke in that when I picked up a new one, which are STIFF, I can't seem to shoot the darn thing.    :dunno:
Title: Re: Tabs
Post by: Etter on August 14, 2014, 08:08:00 AM
I like the neet calf hair. Very soft.
Title: Re: Tabs
Post by: Roger Norris on August 15, 2014, 08:07:00 AM
I am completely sold on Bateman tabs. This thread has me thinking I better order 1/2 dozen or so...
Title: Re: Tabs
Post by: SS Snuffer on August 15, 2014, 10:41:00 AM
Well don't try Landcaster they are the new ones too. You can tell by the package. Small ziplock bags are the old ones. If you find them let me know where OK