Trad Gang
Main Boards => PowWow => Topic started by: PopeandYoung_51 on June 26, 2014, 06:22:00 PM
-
Does anyone know what kind of bow finish Robertson's currently use? I put a pretty good ding in my new bolt-Primal and I don't want to be without it to send it to get it touched up; it's and amazing bow. I want to try and touch it up myself. I've tried getting a hold of Dick a couple times without success. Thanks guys.
-
Call Dick and ask, I believe he went away from Thunderbird a few years back.
-
Vikki is there as I talked to her this week and believe I saw that or heard Yote is back around...if it breaks the finish into wood I would put some super glue in bottom to seal and protect it until you can get it worked out.
I ordered a Primal Styk a month or so ago...so will see the difference if any between my Vision Falcon.
Good luck...
-
I just got a purist back refinished - not sure what it is but it looks perfect - beautiful - flat finish and looks durable. This bow was about 20 yrs old and stomped into the mud and dust - Dick brought it back to new condition.
<><
<------------------<<<<<<<
-
He will might use a two part finish. To refinish a boo boo, sand it smooth with 150 grit, then 200 and 400 then finish over with a Wipe On Poly, or Mini-Wax Polyurethane. You can use whatever you want, but some will yellow with age. It will take five or more hand coats. Finish will not act as a filler. If the edges are rough, it will show later.
-
Thanks for the info guys.