Anyone shooting these shafts out of a 60# R/D longbow? What is your set-up? I want to try these shafts but not sure if the 350 spine is going to be enough or if I should jump to the 300. I'm looking for about a 30% FOC.
My current set up is 60# @ 28". 27.5-28" draw. The arrows I shoot now are CE 350, 29.3 BOP, 100gr insert and 250 gr. point = 720 grains and and FOC of 23%. Yes, they shoot great but I am a tinkerer and always trying to improve my set up.
Any opinions from those who have used them would be appreciated.
Pete, I use these shafts, I can shoot the 350's out of 56#
@ 29" bow, about 400 gr. up front, 30+ FOC, Killed several
African animals with this set up, flies like a dart, team them up
With a Grizzly BH. Can't be beat.
I think with your shorter Draw, you should be able to shoot
The 350's as well, even with a little more poundage. You will love the penetration!!!!
RW
Thanks, Roy, that's exactly the info I was looking for. Looking forward to playing around with them.
I'm shooting the .300's (bows cut past center) quite a bit. Also have some .350's and .400's I shoot out of some of my bows cut a little further from center.
What I'm doing with the VForce HV's is adding a 100 gr. insert and then putting all the way up to 315 gr tips on. This gives an an extremely high FOC.
I can shoot .300's with 100 gr inserts and 300-315 gr inserts in several of my bows. These arrows penetrate like crazy.
350 spine.