I used to have a Delta quiver that had take-down brackets mounted the limb bolts. I see they still make the quiver for the Bear bows. I liked the distance between the hood and the gripper. Does anyone know of a source for the style that mounts under the limb bolts?
Thanks,
Bill
http://www.3riversarchery.com/Fred+Bear+Custom+Recurve+7-Arrow+Bow+Quiver_i3193_baseitem.html
Like this one, but the mounting bars extended around the front of the bow and were set at an angle to match the base of the limbs.
Eagle's Flight Archery could fix you up. You'd need a totem shaft and limb bolt kit. Don and Karen are some really nice folks and would be glad to talk to you. :archer2:
http://www.eaglesflightarchery.com/efa/quivers.html
I will give it a look as an option if i can't find a Delta.
I've made quite a few custom arms for Delta quivers,to get the degree of angle that I wanted as well as to keep the quiver closer to the bow riser.It is just a matter of buying some aluminum bar,1/8"x3/4",determinng the arm length etc,cutting and drilling a hole on either end,then painting.
You may want a little bit wider arm,to fit under the limb bolts but the principle is the same.