Trad Gang

Main Boards => PowWow => Topic started by: KYFOXSTICK on April 14, 2014, 09:55:00 AM

Title: Quiver for your 3 piece Pronghorn?
Post by: KYFOXSTICK on April 14, 2014, 09:55:00 AM
I was wondering which quiver you prefer for your 3 piece pronghorn. I attached one yesterday that I have used on previous bows but this bow is so quiet it actually seemed to make it louder. Thoughts and pics of setups?

Thx
Title: Re: Quiver for your 3 piece Pronghorn?
Post by: FerretWYO on April 14, 2014, 09:58:00 AM
A quiver can add some noise. I have a Great Northern and Kanati Pro Angle that I use. Get the ends as far apart as you can and they will be a little more quiet.
Title: Re: Quiver for your 3 piece Pronghorn?
Post by: MnFn on April 16, 2014, 12:29:00 PM
I have used both a great northern strap on and thunderhorn boa. I think I like the Boa a little better, but both  has worked well.  I have not noticed any extra noise associated with the quivers.
Title: Re: Quiver for your 3 piece Pronghorn?
Post by: Fritz on April 16, 2014, 12:36:00 PM
What Randy said. I use the GN adjustable strap on.
Title: Re: Quiver for your 3 piece Pronghorn?
Post by: on April 16, 2014, 12:58:00 PM
When I had a Pronghorn, I used the GN quick release which attached under the limb bolts. Very quiet, light and bombproof.
Title: Re: Quiver for your 3 piece Pronghorn?
Post by: southernwoody on April 16, 2014, 04:43:00 PM
I use a thunderhorn boa on mine.
Title: Re: Quiver for your 3 piece Pronghorn?
Post by: SCATTERSHOT on April 16, 2014, 05:29:00 PM
I use an Eagle Flight on mine It straps on, stays put, and is very light. Bonus is you can use it on many different bows if you want.
Title: Re: Quiver for your 3 piece Pronghorn?
Post by: Steve Jr on April 16, 2014, 08:02:00 PM
I use a older Kanati on mine it uses the Velcro straps and it seems to be quiet.
Title: Re: Quiver for your 3 piece Pronghorn?
Post by: Roadkill on April 16, 2014, 08:50:00 PM
I made one.  Straps on with velcro.  The difference is I use a carbon shaft, cut just short of allowing the quiver to sit parallel. This allows me to allow some, " close up" pressue to keep the top and bottom of the quiver pulling against one another. Less chance for vibrations and it keeps them in alignment
Just my take
Title: Re: Quiver for your 3 piece Pronghorn?
Post by: cobullelk on April 16, 2014, 09:53:00 PM
I use Thunderhorn Small Fry's on my Pronghorn's.
Title: Re: Quiver for your 3 piece Pronghorn?
Post by: KYFOXSTICK on April 16, 2014, 11:21:00 PM
Thx guys...I appreciate your time. I like the idea of it attaching under the limb bolts. I have a gn strap on...had worked great on other bows in the past just seemed to add a little more noise to the bow...and that goes against my favorite feature of the bow...how quite it flings a arrow. I will play with the ideas mentioned above and hopefully come up with a solution

Thx again
Title: Re: Quiver for your 3 piece Pronghorn?
Post by: trad_bowhunter1965 on April 17, 2014, 12:44:00 PM
I use Selway quick detach quiver very quite.
Title: Re: Quiver for your 3 piece Pronghorn?
Post by: Cootling on April 18, 2014, 09:06:00 AM
I used a Great Northern strap-on, a Great Northern limb-bolt mount, a Selway 6-arrow, and a Selway 5 arrow on my Pronghorns.  My favorite of the lot, by a very large margin, has been the Selway 5-arrow.
Title: Re: Quiver for your 3 piece Pronghorn?
Post by: Yellow Dog on April 18, 2014, 09:18:00 AM
QuoteOriginally posted by huntryx:
When I had a Pronghorn, I used the GN quick release which attached under the limb bolts. Very quiet, light and bombproof.
X2   :thumbsup:  Best option if you like Great Northerns IMHO.