Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: Si on March 08, 2014, 02:50:00 PM

Title: applying snake skins to glass
Post by: Si on March 08, 2014, 02:50:00 PM
In all my bow making i have yet to put a real skin on a laminated glass bow. I installed a fabric skin and used bow epoxy and it came out fine and I have seen the utube using Barge. I am sure there are many threads on this so I hate to bother you all but would like any advice or a link to a good thread.
Thanks
Si
Title: Re: applying snake skins to glass
Post by: drewsbow on March 08, 2014, 03:52:00 PM
rough up the glass and use tight bond III
Title: Re: applying snake skins to glass
Post by: macbow on March 08, 2014, 03:57:00 PM
Like drewsbow says it sort of a standard.
Title: Re: applying snake skins to glass
Post by: Caughtandhobble on March 08, 2014, 04:08:00 PM
I think there is a good write up in the DIY section.

You can send your bow to SEMO_HUNTER and he will do a perfect job for a very reasonable price  :thumbsup:
Title: Re: applying snake skins to glass
Post by: joe ashton on March 08, 2014, 04:19:00 PM
tite  bond III  works great.
Title: Re: applying snake skins to glass
Post by: Si on March 09, 2014, 10:35:00 AM
Thanks guys, I thought Titebond was for wood application only?
Title: Re: applying snake skins to glass
Post by: macbow on March 09, 2014, 11:30:00 AM
Not in this case. Be sure to scuff the glass some.
Title: Re: applying snake skins to glass
Post by: critter69 on March 09, 2014, 06:59:00 PM
Does any one use smooth on ?
Text only | Text with Images