Print Page - Bear Kodiak Hunter question (s)

Title: Bear Kodiak Hunter question (s)
Post by: graybarkhunter on February 23, 2014, 06:08:00 PM

I recently got access to a left handed Kodiak Hunter and was wondering what brace height is needed and what year it was made?? Serial Number Kt 79438 AMO 60" 40x#... It also has the number 43 written right above where the shelf meets the riser....any ideas ?
This is an experiment , as I am left eye dominant and have been shooting a right handed bow since I started.. Thanks

Title: Re: Bear Kodiak Hunter question (s)
Post by: wooddamon1 on February 23, 2014, 06:44:00 PM

Not sure on the year, but the 43 means actual poundage at 28". Great bows!

Title: Re: Bear Kodiak Hunter question (s)
Post by: finkm1 on February 23, 2014, 08:17:00 PM

Is it green futurewood?

Title: Re: Bear Kodiak Hunter question (s)
Post by: Stumpkiller on February 23, 2014, 08:44:00 PM

On any recurve I start at 1/8th of the AMO and adjust up ot down 1/2" or so until I get good flight and quiet. 7-1/2" for the K.Hunter. Mine is currently at 8".

Title: Re: Bear Kodiak Hunter question (s)
Post by: graybarkhunter on February 23, 2014, 10:44:00 PM

QuoteOriginally posted by finkm1:
Is it green futurewood?

Yes it is

Title: Re: Bear Kodiak Hunter question (s)
Post by: graybarkhunter on February 23, 2014, 10:45:00 PM

Thanks for the replies

Title: Re: Bear Kodiak Hunter question (s)
Post by: JoeArizona on February 24, 2014, 05:00:00 PM

I have my Kodiak Hunter greenie set at 8" also. I just love that bow...

Title: Re: Bear Kodiak Hunter question (s)
Post by: stevem on February 24, 2014, 06:54:00 PM

8" seems like the golden brace height for the two I have. One had a shorter brace height and I didn't like shooting it. On a whim I shortened the string and viola- really nice results. I suspect between 7 3/4" and 8" you will find what you want.

Trad Gang

Main Boards => PowWow => Topic started by: graybarkhunter on February 23, 2014, 06:08:00 PM