Trad Gang

Main Boards => PowWow => Topic started by: SELFBOW19953 on February 13, 2014, 04:00:00 PM

Title: Tip Overlay
Post by: SELFBOW19953 on February 13, 2014, 04:00:00 PM
I found the tip overlay of one of my "too many" bows lying on the floor not long ago.  It looks fine-no cracks, chips, etc.  What's the best glue to use to put it back on?
Title: Re: Tip Overlay
Post by: Pat B on February 13, 2014, 04:08:00 PM
Jell superglue. Be sure both surfaces are flat and clean of old glue.
Title: Re: Tip Overlay
Post by: Wapiti Chaser on February 13, 2014, 06:36:00 PM
I have used a two part epoxy. The longer the cure time the better and don't clamp it so tight that all the glue sqeezes out. A little fine sand paper to make sure no edges get your string and your better than new.
Title: Re: Tip Overlay
Post by: Shakes.602 on February 13, 2014, 08:25:00 PM
JB Weld.... It wont come off again!