Trad Gang

Main Boards => PowWow => Topic started by: Aggieland on January 25, 2014, 02:33:00 PM

Title: need advice on efa quiver asap..
Post by: Aggieland on January 25, 2014, 02:33:00 PM

I'M ordering an Eagle's flight 4 arrow quiver with totum and wing features. My question is this, I want to fit 3 centaur big game broadheads and one field tip or small judo in the quiver hood. But I would like to get the smallest hood I can fit them In. What size hood do you guys/gals suggest?  Thanks for any advice, casey

Title: Re: need advice on efa quiver asap..
Post by: mec lineman on January 25, 2014, 02:43:00 PM

I'VE got a chief ,not really that big. The jumbo2 should work.

Title: Re: need advice on efa quiver asap..
Post by: Gator1 on January 25, 2014, 03:23:00 PM

Get the biggest he has... Even that is smaller than most quivers..

Great product

Title: Re: need advice on efa quiver asap..
Post by: Aggieland on January 25, 2014, 03:25:00 PM

What about the mesa quiver he has. Can he make a smaller version of it?

Title: Re: need advice on efa quiver asap..
Post by: Aggieland on January 25, 2014, 04:31:00 PM

I went with a tall mesa after talking with the good folks at eagle's flight.

Title: Re: need advice on efa quiver asap..
Post by: Meathook 1 on January 25, 2014, 05:34:00 PM

Good choice,I have one on my A&H 3pc LB.Good balance with this quiver,and have 4 Simmons Tree Sharks in it.I will order another before next hunting season.


            Enjoy it.Meathook

Title: Re: need advice on efa quiver asap..
Post by: Aggieland on January 25, 2014, 05:53:00 PM

Do you have a pic meathook?

Title: Re: need advice on efa quiver asap..
Post by: olddogrib on January 26, 2014, 06:18:00 AM

E-mail or call Don. I have the Mesa hood and shoot Simmon's Tigersharks without problems, but mine is a 3-arrow model.

Title: Re: need advice on efa quiver asap..
Post by: on January 26, 2014, 07:35:00 AM

I would call him and ask-- he will tell you the correct size for your needs. The website isn't all that clear on the sizing IMHO.

Title: Re: need advice on efa quiver asap..
Post by: warden415 on January 26, 2014, 09:28:00 AM

what is the Mesa? I looked at the website but didn't see the mesa option?

Title: Re: need advice on efa quiver asap..
Post by: Meathook 1 on January 26, 2014, 09:51:00 AM

Aggieland,if you need pics still just pm me.


                    Meathook

Title: Re: need advice on efa quiver asap..
Post by: WESTBROOK on January 26, 2014, 01:14:00 PM

Here ya go Warden, this is Ron LaClair's model but EFA builds it.

 http://www.shrewbows.com/quivers_edge/index.html

Title: Re: need advice on efa quiver asap..
Post by: 2fletch on January 28, 2014, 03:54:00 PM

We haven't done a great job of getting out the info on the Mesa series of quivers. We will try to improve on that. This first photo is of a 3 arrow Tall Mesa. It is 3.5" wide by 3.75" tall, and will take up to a 3.25" broadhead, up to 2"wide. You have seen the 3+1 Flat Mesa on Ron's site. He calls it the "Edge". The Short Mesa is the same 3.5" in width as the Tall Mesa, but is only 3" in height. It will take a broadhead up to 2.5" in height and 2" wide. I'll try to show it as well later.
 

  (http://i109.photobucket.com/albums/n64/2fletch/DSCN1562_zps2f9feccb.jpg) (http://s109.photobucket.com/user/2fletch/media/DSCN1562_zps2f9feccb.jpg.html)

Title: Re: need advice on efa quiver asap..
Post by: 2fletch on January 29, 2014, 05:12:00 PM

This is not a good photo but gives an idea of the three different profiles of the Flat Top Mesa, Tall Mesa, and Short Mesa. We also make a 4 arrow Target Mesa with the same profile as the Short Mesa.

  (http://i109.photobucket.com/albums/n64/2fletch/DSCN2771.jpg) (http://s109.photobucket.com/user/2fletch/media/DSCN2771.jpg.html)