Print Page - Zipper Nitro BH

Title: Zipper Nitro BH
Post by: RIng on January 11, 2014, 10:56:00 AM

Hi What are people using for a brace hight on the Zipper Nitro ????? Thank You Rick

Title: Re: Zipper Nitro BH
Post by: JRY309 on January 11, 2014, 01:10:00 PM

I would check their website,I brace my Zipper ZSR right at 7&1/8" to the back of the riser.Zipper's measure their brace to the back of the riser,not the deepest part of the grip.

Title: Re: Zipper Nitro BH
Post by: HARL on January 12, 2014, 08:43:00 PM

I don't think Bill has the Nitro info on his site .

Title: Re: Zipper Nitro BH
Post by: zipper bowss on January 13, 2014, 05:34:00 PM

I shoot my 60"er at 7 1/2" from the deepest part of the grip.Much below that and it starts to complain a little. It seems to like it best between 7 1/2 and 8" to the deepest part of the grip. The longer Nitro's usually like a little higher brace height.
Sorry for the late reply. My internet has been down for a couple of days.
Bill

Title: Re: Zipper Nitro BH
Post by: Jwilliam on January 13, 2014, 07:04:00 PM

Shooting both of mine at 7 1/2" as well. :thumbsup:

Bill

Title: Re: Zipper Nitro BH
Post by: RIng on January 13, 2014, 07:35:00 PM

Thanks All !!

Trad Gang

Main Boards => PowWow => Topic started by: RIng on January 11, 2014, 10:56:00 AM