I want to hang my bear rug on the wall... Any suggestions on do's and don'ts before starting? My rug has wall hooks installed already, I just want to get it off the floor.
Try to keep it from constant direct sunlight if at all possible. They take up a lot of space, just finding a spot could be an issue. I've always liked then hung horizontal.
No advice from me as I don't know.......but........I sure would like to see a pic once you get it on the wall!
Bisch
I'm getting ready to get mine up off the floor and the only space I have large enough (there will be no horns/hides on display upstairs!!!) is the wall of our basement stairs leading down to MY area.
It will have to be hung diagonally, but with the head on the up-slope, I think it will look pretty cool. Mine also has hanging rings on the back. It has a red felt showing around the edges that will come off first.
I have had mine hung horizontally, and, as stated above, try and keep it out of direct sunlight. Mine was taken way back in 1987, and still looks like new. I dust him off occasionally, but other than that, just let him hang and enjoy him.
What is the best type of hook to use in the wall?
Mine should be done next month and I am wanting to put it on the wall too.
Hopefully enough hooks were installed. In some cases I have added a few extra to keep them from sagging. Dust regular with none chemical cleaners.
Mine did not have any wall hooks provided. All I did was took several push pins( flat ones, matching color) and went around the outside border. Put extra ones around the heavier parts like the feet and head. Hung perfectly fine.
I guess you'd call them tacks too.
QuoteOriginally posted by dhermon85:
Mine did not have any wall hooks provided. All I did was took several push pins( flat ones, matching color) and went around the outside border. Put extra ones around the heavier parts like the feet and head. Hung perfectly fine.
That's how mine hangs as well. The only real hanger is under the head. Mine has been hanging for about 8 years. The only suggestion I have is to flip it every year or so or the hair will start to take a set. Meaning the hair on the top side will begin to want to stay standing strait out or curved depending on its length. You would not think gravity would effect the hair that much but it does.
I've always stapled mine to the wall. I just part the hair a bit and let er rip.Ditto for keeping light off as with any Taxidermy. Mine has been on a lot of different walls too. No issues.
QuoteOriginally posted by Gun:
I've always stapled mine to the wall. I just part the hair a bit and let er rip.Ditto for keeping light off as with any Taxidermy. Mine has been on a lot of different walls too. No issues.
What Gun said. This one is stapled. I've got another one drywall screwed to the wall. They are not real fragile!
(http://i23.photobucket.com/albums/b351/osminski/2012%20Manitoba%20Bear/36D52E6E-3DE2-4773-B3A0-97D80DF25935_zpsl0fe5jhw.jpg) (http://s23.photobucket.com/user/osminski/media/2012%20Manitoba%20Bear/36D52E6E-3DE2-4773-B3A0-97D80DF25935_zpsl0fe5jhw.jpg.html)
Bladepeek I had one hung in my stairway for several years and it ended up with a rubbed spot on it people walking up and down the stairs.
I put a picture type hanger on the plywood base for the head and then just took small finish nails and nailed through the hide for the shape I wanted. I figured putting the nails through the hide would "hide" the nails and make it more difficult to pull through than if I just nailed through the felt.
(http://i175.photobucket.com/albums/w132/rawilt/Bear%20Rugs%20and%20Full%20Mount/IMG_6450_zps61c78fda.jpg) (http://s175.photobucket.com/user/rawilt/media/Bear%20Rugs%20and%20Full%20Mount/IMG_6450_zps61c78fda.jpg.html)
You also may want to hang it so that the head is slanting upwards. I had a bear hanging for years on the wall leading upstairs to our bedrooms. One morning, I came downstairs and stepped on something sharp and very painful. Turned out to be the mount's whole plastic mouth/teeth insert. The mount had dried out, obviously and the glue let go, dropping the teeth out. Ouch! :(
Mine is stapled to the wall. I didn't staple through the hide. Stapled it through the felt. I have 2 layers of felt. Stapled it through the bottom layer so you can't see them. Been hanging there just fine for several years.
My Grizzly has a padded (quilted) backing with the D-rings sewed on. I used picture (J hooks) attached to the wall and the D rings hook in them nicely. I hung it hoz. at I didn't have enough ceiling room for diaz.
My wife sewed some small metal rings on the backing for me and we hung it horizontally.
(http://i17.photobucket.com/albums/b99/mule157/DSC00473.jpg) (http://s17.photobucket.com/user/mule157/media/DSC00473.jpg.html)
This one is hung with drywall anchors and screws w/washers to prevent the screw heads from pulling through the hide. Pretty solid really. Mike
I have a Toklat grizz i hang over the bannister. It is impressive when you walk in the front door I have a blackie i put on the wall with tacks . Use plenty to keep it flat
You guys got some great ME rooms, congrats
I've got mine hung on a 45* head up. and I just used a stapler and 15 or so staples...
If it already has plenty of d rings installed its nice to have an assistant when hanging. I instruct people when they pic up their rugs from me to use painters tape to mark the walls with the help of an assistant to make sure they put a nail at they exact location as the d ring as they hold the rug in place by hand, its also nice if you can locate a stud in the wall for the head, if not use a screw in drywall anchor (these are rated to hold 60lbs) as insurance if only drywall in head location.
Mine came with rings under the head and under the paws. Attached to wall with screws in sheet rock and picture hooks. They both look great and have stayed in place since 2005.