Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: jebeckjr on January 04, 2014, 09:41:00 PM

Title: Brace height recommendation for a '60's Hoyt Xpert
Post by: jebeckjr on January 04, 2014, 09:41:00 PM
Hi gang,

I have a friend with a '60's era Hoyt Xpert.  Does anyone know the recommended brace height range?

Thanks!
Title: Re: Brace height recommendation for a '60's Hoyt Xpert
Post by: jebeckjr on January 05, 2014, 05:10:00 PM
Bump just in case someone missed it.  Currently, he's setup around 6.5"' which feels a little low to me.  It's been a while since I've seen him shoot the bow, so I can't comment on the tuning or noise.  He's been practicing and putting the time in the woods also - I think he's hooked!
Title: Re: Brace height recommendation for a '60's Hoyt Xpert
Post by: markbrit on January 05, 2014, 07:28:00 PM
Hi,

This is my bow. Thanks John for posting. I adjusted the brace height to 7" and it feels pretty good.

Still looking for feedback if anyone has any experience, thanks!
Title: Re: Brace height recommendation for a '60's Hoyt Xpert
Post by: jebeckjr on January 05, 2014, 07:47:00 PM
Mark, glad your membership was processed.  Welcome to TradGang!
Title: Re: Brace height recommendation for a '60's Hoyt Xpert
Post by: markbrit on January 08, 2014, 03:17:00 PM
Any thoughts?
Title: Re: Brace height recommendation for a '60's Hoyt Xpert
Post by: hardbern on November 10, 2016, 07:12:00 PM
7"-8" was the recommended brace height
from centre of handle (/pivot)
Text only | Text with Images